Moto-Data

Kawasaki Z-X10R Ninja (2008) vs Royal Enfield Bullet 500 Classic Battle Green (2017) vs Ducati Scrambler Urban Enduro (2015-16) vs Yamaha YZF 1000R Thunder ace (2000) vs BMW K 1600 GTL (2022)

Comparison technical specifications


Add bike
2008 Kawasaki Z-X10R Ninja
Remove bike
2017 Royal Enfield Bullet 500 Classic Battle Green
Remove bike
2015 Ducati Scrambler Urban Enduro
Remove bike
2000 Yamaha YZF 1000R Thunder ace
Remove bike
2022 BMW K 1600 GTL
Remove bike
Make: Kawasaki Royal Enfield Ducati Yamaha BMW
Model: Z-X10R Ninja Bullet 500 Classic Battle Green Scrambler Urban Enduro YZF 1000R Thunder ace K 1600 GTL
Years: 2008 2017 2015-16 2000 2022
Engine: Four stroke, transverse four cylinder, DOHC, 4 valves per cylinder. Four Stroke, single Cylinder, OHV Four stroke, 90° “L” twin cylinder, SOHC, desmodromic 2 valve per cylinder Four stroke, transverse four cylinder, DOHC, 5 valves per cylinder Four stroke, transverse six cylinder, 4 valves per cylinder
Capacity: 998 cc / 60.9 cu-in 499 cc / 30.4 cu-in 803 cc / 49.0 cub in 1002 cc / 61.1 cu-in 1649 cc / 100.6 cu-in
Bore x Stroke: 76 x 55 mm 84 x 90 mm 88 x 66 mm 75.5 x 56 mm 72 x 67.5 mm
Compression Ratio: 12.7:1 8.5:1 11.0:1 11.5:1 12.2:1
Cooling System: Liquid cooled Air Cooled Air cooled Liquid cooled Liquid cooled
Starting: Electric Electric & Kick Electric Electric Electric
Max Power: 138.3 kW / 188 hp @ 12500 rpm 20.3 kW / 27.2 hp @ 5200 rpm 55 kW / 75 hp @ 8250 rpm 145 hp / 106.7kW @ 10000 rpm 118 kW / 160 hp @ 6750 rpm
Max Torque: 113 Nm / 11.5 kgf-m @ 8700 rpm 41.3 Nm / 4.2 kgf-m / 30.5 lb-ft @ 4000 rpm 68 Nm / 6.9 kgf-m / 50 lb-ft @ 5750 rpm 108.3Nm / 11kgf-m @ 8500 rpm 180 Nm / 132.7 lb-ft @ 5250 rpm
Clutch: Wet multi-disc, manual Wet, multiplate APTC wet multiplate with mechanical control Multi-plate wet clutch Multiple-disc clutch in oil bath
Transmission: 6 Speed 5 Speed, constant mesh 6 Speed 5 speed 6-speed gearbox, helical cut
Final Drive: Sealed chain Chain Chain, front spocket 15, rear sprocket 46 Chain Shaft
Frame: Backbone/Twin-tube, aluminium (Pressed/die-cast composite structure) Single downtube, engine used as stress member Tubular steel trellis frame Aluminium, twin spar Bridge-type frame, cast aluminium, load-bearing engine
Front Suspension: 43mm inverted fork with DLC coating, adjustable rebound and compression damping, spring preload adjustability and top-out springs Telescopic, Hydraulic Damping, Stroke 130 mm wheel travel Upside down Kayaba 41 mm fork 45mm forks, adjustable preload, bump and rebound. BMW Motorrad Duolever; central spring strut
Rear Suspension: Bottom-Link Uni-Trak® with top-out spring, stepless, dual-range (high/low-speed) compression damping, stepless rebound damping, fully adjustable spring preload Twin shocks, gas charged with 5-step adjustable preload Kayaba rear shock, pre-load adjustable Mono shock adjustable preload, bump and rebound. Cast aluminum single-sided swing arm with BMW Motorrad Paralever; central spring strut
Front Brakes: 2x 310mm discs 4 piston calipers Single 280mm disc, 2 piston caliper Single 330 mm disc, 4-piston caliper with ABS as standard equipment 2x 298mm discs 4 piston calipers 2 x 320mm discs, 4 piston calipers
Rear Brakes: Single 220 mm disc 1 piston caliper Drum, Ø 152 mm, single leading shoe internal expanding Single 245 mm disc, 1-piston caliper with ABS as standard equipment Single 245mm disc 2 piston caliper Single 320mm disc, 2 piston caliper
Front Tyre: 120/70 ZR17 90/90-19 110/80 R18 Pirelli MT 60 RS 120/70 ZR17 120/70 ZR17
Dimensions: Length 2110 mm / 83 in Width 710 mm / 27.9 in Height 1135 mm / 44.6 in Length: 2180 mm / 85.8 in Width: 800 mm / 31.5 in Height: 1080 mm / 42.5 in Length 2100 - 2165 mm / 82.7 - 85.2 in Height 1150 mm / 45.3 in Width 845 mm / 33.3 in Length 2085mm / 82.0 in Width 740 mm / 29.1 in Length: 2489 m / 97.9 in Width: 1000 mm / 39.4 in Height: 1440 mm - 1597 mm / 56.7 in - 62.9 in
Wheelbase: 1415 mm / 55.7 in 1370 mm / 53.9 in 1455 mm / 57.3 in 1433 mm / 56.4 in 1618 mm / 63.7 in
Seat Height: 880 mm / 34.6 in 800 mm / 31.5 in 790 mm / 31.1 in. low seat 770 mm / 30.3 in. available as accessory 795 mm / 31.3 in 750 - 800 mm / 29.5 - 31.4 in (standard)
Fuel Capacity: 17 Litres / 4.4 us GAL 14.5 Litres / 3.8 US gal 13.5 Litres / 3.57 US gal / 3.0 Imp gal 19 Litres / 5.0 gal 26.5 Litres / 7.0 US gal