Ducati 48/50 Brio (1963-67) vs Honda CBR 500R (2022)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | Ducati | Honda |
| Model: | 48/50 Brio | CBR 500R |
| Years: | 1963-67 | 2022 |
| Engine: | Two-stroke, single cylinder, piston port | Four stroke, parallel-twin, DOHC, 4 valves per cylinder |
| Capacity: | 47.6 cc / 2.9 cu in | 471 cc / 28.7 cu-in |
| Bore x Stroke: | 38 x 42 mm | 67.0 x 66.8 mm |
| Compression Ratio: | 7.0:1 | 10.7:1 |
| Cooling System: | Fan cooled | Liquid cooled |
| Induction: | Dell'Orto SHA 14/12 | PGM-FI with 34mm throttle bodies |
| Ignition: | 6V 18W flywheel magneto | Computer-controlled digital transistorized with electronic advance |
| Starting: | Kick | Electric |
| Max Power: | 1.1 kW / 1.5 hp @ 5200 rpm | 46.9 hp / 35 kW @ 8600 rpm |
| Clutch: | Wet, multiplate | Wet multiplate, Assisted slipper clutch |
| Transmission: | Three speed | 6 Speed |
| Final Drive: | Chain | O-ring-sealed chain |
| Frame: | Pressed steel | Steel diamond |
| Front Suspension: | Swinging shackle fork | 41mm Showa SFF-BP Inverted fork, pre-load adjustable |
| Rear Suspension: | Swingarm, dual rubber shocks | Prolink mono with 5 stage pre-load adjuster, Steel hollow cross swingarm |
| Front Brakes: | Drum, 105 mm | 2x 296mm wave disc with Nissin radial-mount two piston calipers |
| Rear Brakes: | Drum, 105 mm | Single 240mm wave disc 1 piston calipers |