Honda CB 125R (2017-18) vs Yamaha YD-2 (1958-60) vs Husqvarna FE 450 (2018-2019)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
Remove bike |
| Make: | Honda | Yamaha | Husqvarna |
| Model: | CB 125R | YD-2 | FE 450 |
| Years: | 2017-18 | 1958-60 | 2018-2019 |
| Engine: | Four stroke, single cylinder, SOHC, two valve | Two stroke, piston-port, parallel twin | Four stroke, single cylinder, SOHC, 4 valve |
| Capacity: | 124.7 cc / 7.6 cu-in | 247 cc / 15.0 cu-in | 449 cc / 27.4 cu-in |
| Bore x Stroke: | 58 x 47.2 mm | 54 x 54 mm | 95 x 63.4 mm |
| Cooling System: | Liquid cooled | Air-cooled | Liquid cooling system, continuous circulation of cooling liquid with water pump |
| Compression Ratio: | 11.0:1 | 11.8:1 | |
| Induction: | PGM-FI electronic fuel injection | Single carburetor | Fuel Injection |
| Starting: | Electric | Kick | Electric |
| Max Power: | 13.1 hp / 9.8 kW @ 10000 rpm | 14.5 hp @ 6000 rpm | NA |
| Max Torque: | 10.2 Nm / 7.3 lb-ft @ 8000 rpm | 4.1 kg-m @ 5000 rpm | NA |
| Transmission: | 6 Speed | 5 Speed | 6 speed, claw shifted |
| Final Drive: | O-ring sealed chain | Chain | Chain X-Ring 5/8 x 1/4 in |
| Front Suspension: | 41mm upside-down telescopic inverted fork | Telescopic forks | 48mm WP-USD Xplor with preload adjuster |
| Rear Suspension: | Single-damper | Swing arm | WP Monoshock with linkage |
| Front Brakes: | Single 296mm disc, four piston Nissin caliper | Drum | Single 260 mm Magura two-piston floating calliper |
| Rear Brakes: | Single 220mm disc, one piston caliper | Drum | Single 220 mm Magura single-piston floating calliper |
| Front Tyre: | 110/70R17M/C 54H | 2.50 -16 | 90/90-21 |
| Rear Tyre: | 150/60R17M/C 66H | 2.50 -16 | 140/90-18 |
| Fuel Capacity: | 10 Litres / 2.6 US gal | 8.5 Litres / 2.3 US gal |