Honda CB 1000R (2017)
Comparison technical specifications
Add bike |
Remove bike |
| Make: | Honda |
| Model: | CB 1000R |
| Years: | 2017 |
| Engine: | Four stroke, transverse four cylinder, DOHC, 4 valve per cylinder. |
| Capacity: | 998 cc / 60.9 cu-in |
| Bore x Stroke: | 75 x 56.5 mm |
| Cooling System: | Liquid cooled |
| Compression Ratio: | 11.2:1 |
| Lubrication: | Wet sump |
| Induction: | PGM-F1 Electronic fuel injection36mm throttle bodies |
| Ignition: | Computer controlled digital transistorized |
| Battery: | 12V/8.6AH |
| Starting: | Electric |
| Max Power: | 123.4 hp / 92 kW @ 10000 rpm |
| Max Torque: | 100 Nm / 73.8 lb-ft @ 8000 rpm |
| Clutch: | Wet, multiplate with coil springs. |
| Transmission: | 6 Speed |
| Final Drive: | #530 O-ring sealed chain |
| Gear Ratio: | 1: 2.538 (33/13) / - 2: 1.941 (33/17) / - 3: 1.579 (30/19) / - 4: 1.363 (30/22) / - 5: 1.217 (28/23) / - 6: 1.115 (29/26) |
| Frame: | Mono-back born coast aluminous |
| Front Suspension: | 43mm Inverted HMAS cartridge type telescopic forks, with stepless reload, compression and rebound adjustable |
| Front Wheel Travel: | 120 mm / 4.7 in |
| Rear Suspension: | Monoshock with gas charged HMAS damper rebound adjustable |
| Rear Wheel Travel: | 128 mm / 5.0 in |
| Front Brakes: | 2x 310mm discs 4 piston calipers |
| Rear Brakes: | Single 256mm disc 2 piston caliper |
| Front Wheel: | Hollow-section 4-spoke cast aluminium |
| Rear Wheel: | U-section 4-spoke cast aluminium |
| Front Tyre: | 120/70 ZR17 |
| Rear Tyre: | 180/50 ZR17 |
| Rake (Caster Angle): | 25.0° |
| Trail: | 99.0mm / 3.9 in |
| Wheelbase: | 1445 mm / 56.8 in |
| Seat Height: | 828 mm / 32.6 in |
| Ground Clearance: | 130 mm / 5.1 in |
| Wet Weight: | 220 kg / 485 lbs |
| Fuel Capacity: | 17 Litres / 4.5 US gal |
| Consumption Average: | 18.3 km/lit |
| Standing ¼ Mile: | 11.3 sec |
| Top Speed: | 228.6 km/h / 142.0 mph |