Aprilia RSV-4 Factory (2010) vs Kawasaki Z 300 (2017-18)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | Aprilia | Kawasaki |
| Model: | RSV-4 Factory | Z 300 |
| Years: | 2010 | 2017-18 |
| Engine: | Four stroke, longitudinal 65° V four , DOHC, 4 valves per cylinder | Four stroke . parallel twin, DOHC, 4 valves per cylinder. |
| Capacity: | 999.6 cc / 61 cu in | 296 cc / 18.0 cu-in |
| Bore x Stroke: | 78 x 52.3 mm | 62 x 49 mm |
| Compression Ratio: | 12.8:1 | 10.6:1 |
| Cooling System: | Liquid cooled | Liquid cooled, |
| Induction: | Variable height intake trumpets. Airbox with aerodynamic side intakes. 4 Throttle bodes, 8 injectors, ride-by-wire fuel management. Multi-mapping | Fuel injection: ø32 mm x 2 (Keihin), with dual throttle valves |
| Lubrication: | Wet sump lubrication system with oil radiator and two oil pumps (lubrication and cooling) | Forced lubrication, wet sump |
| Ignition: | Electronic digital ignition integrated in the fuel management system. | TCBI with Digital Advance |
| Starting: | Electric | Electric |
| Max Power: | 132 kW / 180 hp @ 12500 rpm | 38 hp / 28.3 kW @ 11,000rpm |
| Max Torque: | 115 Nm / 11.7 kgf-m / 84.8 lb-ft @ 10000 rpm | 19.9 lb-ft / 26.9 Nm @ 10,000rpm |
| Clutch: | Multi-plate wet clutch with slipper device. | Wet multi-disc, manual |
| Transmission: | 6 Speed | 6 Speed |
| Final drive: | Chain: Drive ratio: 40/16 (2,5) | Chain |
| Gear Ratio: | 1st: 39:15 (2.6) / 2nd: 33:16 (2,063) / 3rd: 34:20 (1.7) / 4th: 32:22 (1,455) / 5th: 34:26 (1,308) / 6th: 33:27 (1,222) | 1st 2.600 (39/15) 2nd 1.789 (34/19) 3rd 1.409 (31/22) 4th 1.160 (29/25) 5th 1.000 (27/27) 6th 0.893 (25/28) |
| Frame: | Twin beam aluminium frame with mixed cast and pressed sheet sections. Adjustments for headstock position and angle, engine height, swingarm pivot height. | Semi-double cradle, high-tensile steel, |
| Front Suspension: | Öhlins Ø43 mm upside-down fork. Lower fork bottoms for radial calipers. Adjustment for preload, compression and rebound. | 37mm hydraulic telescopic fork |
| Rear Suspension: | Double arch aluminium swingarm; mixed thin-wall casting and pressed sheet construction. Öhlins monoshock with piggy-back cylinder. Adjustments for compression, rebound, spring preload and length. APS rising rate linkages. | Bottom-Link Uni-Trak with gas-charged shock and 5-way adjustable preload |
| Front Brakes: | 2 x Ø320 mm lightweight stainless steel floating discs, Brembo monobloc radial calipers with 4 opposed pistons. Sintered pads. Radial master cylinder. Metal braided brake line. | Single 290 mm petal disc 2 piston caliper |
| Rear Brakes: | Single Ø220 mm disc. Brembo floating caliper with 2 insulated pistons. Sintered pads. Master cylinder with integral reservoir. Metal braided brake line. | Single 220 mm petal disc 2 piston caliper |
| Front Tyre: | 120/70 ZR17 | 110/70-17 |
| Rear Tyre: | 190/55 ZR17 | 130/70-17 |
| Trail: | 105 mm / 4.1 in | 82 mm / 3.6 in |
| Dimensions: | Length: 2040 mm / 80.3 in Width: 735 mm / 28.9 in (at the handlebar) Height: 1120 mm / 44.1 in | Length 2010 mm / 79.1 in Width 750 mm / 29.5 in Height 1025 mm / 41.3 in |
| Seat Height: | 845 mm / 33.3 in | 780 mm / 30.5 in |
| Wet Weight: | 205 Kg / 453 lbs | 168 kg / 370 lbs |