Honda XR 250 (1980)
Comparison technical specifications
Add bike |
Remove bike |
| Make: | Honda |
| Model: | XR 250 |
| Years: | 1980 |
| Engine: | Four stroke, single cylinder SOHC, 4 valve |
| Capacity: | 249 cc / 15.2 cu-in |
| Bore x Stroke: | 74 x 57.8 mm |
| Cooling System: | Air cooled |
| Compression Ratio: | 9.6:1 |
| Induction: | 2x 30.5 mm piston valve Keihin carburetor |
| Ignition: | CDI Capasitor-Discharge |
| Spark Plug: | D&EA, Plug gap .028 |
| Starting: | Kick |
| Max Power: | 30 hp / 21.9 kW @ 9000 rpm |
| Max Torque: | 24.5 Nm / 18 lb-ft @ 7500 rpm |
| Clutch: | Wet, four friction discs |
| Transmission: | 5 Speed |
| Final Drive: | Chain |
| Sprockets: | Front 13 T Rear 53 T |
| Front Suspension: | Leading axel hydraulic 38mm forks |
| Front Wheel Travel: | 223.5 mm / 8.8 in |
| Rear Suspension: | Inverted lay-down gas-charged shocks, three step spring pre-load |
| Rear Wheel Travel: | 198 mm / 7.8 in |
| Front Brakes: | Drum |
| Rear Brakes: | Drum |
| Wheels: | DID shoulderless aluminum alloy |
| Front Tyre: | 3.00-23 |
| Rear Tyre: | 4.60-18 |
| Castor Angle: | 26.5° |
| Dimensions: | Length 2210 mm / 87 in Width 874 mm / 34.4 in Height 1210mm / 47.6 in |
| Wheelbase: | 1400 mm / 55.1 in |
| Seat Height: | 880 mm / 34.6 in |
| Footpeg Height: | 356 mm / 14 in |
| Ground Clearance: | 280 mm / 11 in |
| Dry Weight: | 114.5 kg / 252.5 lbs |
| Fuel Capacity: | 9.8 Litres / 2.6 US gal |