Husaberg FE 550e Enduro (2005-06) vs BMW R 1200R Touring Special (2010)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | Husaberg | BMW |
| Model: | FE 550e Enduro | R 1200R Touring Special |
| Years: | 2005-06 | 2010 |
| Engine: | Four stroke, single cylinder, OHC, 4 valves per cylinder. | Four stroke, two cylinder horizontally opposed Boxer, 4 valves per cylinder |
| Capacity: | 549.8 cc / 33.5 cu-in | 1170 cc / 71.4 cu in |
| Bore x Stroke: | 100 x 70 mm | 101 x 73 mm |
| Cooling System: | Liquid cooled | Air/Oil-cooled |
| Compression Ratio: | 11.8:1 | 11.0:1 |
| Induction: | Keihin MX FCR 41 TPS | Electronic intake manifold injection BMS-K |
| Ignition: | Kokusan digital | Digital engine management |
| Starting: | Electric | Electric |
| Max Power: | NA | 80 kW / 109 hp @ 7500 rpm |
| Max Torque: | NA | 115 Nm / 11.7 kgf-m / 85 lb-ft @ 6000 rpm |
| Transmission: | 6 Speed | 6 Speed |
| Final Drive: | Chain | Shaft |
| Frame: | 25CrMo4 tempered | Tubular steel spaceframe, load-bearing engine |
| Front Suspension: | WP USD 4860 MA Husaberg Enduro | BMW Motorrad Telelever; stanchion diameter 41 mm, central spring strut |
| Front Wheel Travel: | 295 mm / 11.6 in | 120 mm / 4.7 in |
| Rear Suspension: | WP PDS 5018 Husaberg Enduro | Cast aluminium single-sided swing arm with BMW Motorrad Paralever; central spring strut, spring pre-load hydraulically adjustable (continuously variable) at handwheel, rebound damping adjustable |
| Rear Wheel Travel: | 320 mm / 12.6 in | 140 mm / 5.5 in |
| Front Brakes: | Single 260mm disc 2 piston caliper | 2 x 320mm discs, ABS |
| Rear Brakes: | Single 220mm disc 1 piston caliper | Single 265mm disc, ABS |
| Front Tyre: | 90/90 -21 | 120/70-ZR 17 |
| Rear Tyre: | 140/80 -18 | 180/55-ZR 17 |
| Wheelbase: | 1490 mm / 58.7 in | 1495 mm / 59.1 in |
| Seat Height: | 930 mm / 26.3 in | 800 mm / 31.4 in |
| Dry Weight: | 109 kg / 240.3 lbs | 198 kg / 436.5 lbs |
| Fuel Capacity: | 9 Litres / 2.4 US gal | 18 Litres / 4.7 US gal |