Honda CM 250 Custom (1981-84) vs Husqvarna TE 125 (2015-16)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | Honda | Husqvarna |
| Model: | CM 250 Custom | TE 125 |
| Years: | 1981-84 | 2015-16 |
| Engine: | Four stroke, parallel twin, OHC, 3 valve per cylinder | Two stroke, single cylinder, with reed intake and exhaust control |
| Capacity: | 234 | 124.8cc / 7.6 cu-in |
| Bore x Stroke: | 53 x 53 mm | 54.0 x 54.5 mm |
| Cooling System: | Air cooled | Liquid cooled |
| Compression Ratio: | 9.4:1 | |
| Induction: | Keihin 29 Carburettor | |
| Ignition: | Contactless, controlled, fully electronic ignition system with digital ignition timing adjustment, type Kokusan | |
| Max Power: | 17 hp @ 7500 rpm | |
| Max Torque: | ||
| Transmission: | 6 Speed | 6 Speed |
| Final Drive: | Chain | Chain. 520 X-Ring |
| Front Suspension: | 31mm Forks, centre axle fork | WP Suspension Up Side Down 4CS |
| Rear Suspension: | Dual shocks adjustable spring preload | WP Monoshock with linkage |
| Front Brakes: | Drum | Single 260mm disc 4 piston caliper |
| Rear Brakes: | Drum | Single 220mm disc 2 piston caliper |
| Front Tyre: | 3.25-18 | 90/90-21 |
| Rear Tyre: | 110/90-16 | 120/80-18 |
| Wet-Weight: | 140 kg | 117.0 kg / 257.9 lbs |
| Fuel Capacity: | 12.5 Litres | 9.5 Litres / 2.5 US gal |