KTM 250 Duke (2024) vs Triumph Daytona 900 Super III (1995-96)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | KTM | Triumph |
| Model: | 250 Duke | Daytona 900 Super III |
| Years: | 2024 | 1995-96 |
| Engine: | Four stroke, single cylinder, DOHC, 4 valves per cylinder | Four stroke, transverse three cylinder, DOHC, 4 valves per cylinder. |
| Capacity: | 248.8 cc / 15.2 cu in | 885 cc / 54.0 cu-in |
| Bore x Stroke: | 72 x 61.1 mm | 76 x 66 mm |
| Compression Ratio: | 10.6:1 | |
| Cooling System: | Liquid cooled | Liquid cooled |
| Lubrication: | Wet sump | Wet sump |
| Induction: | 3 x 36 mm flat side CV Mikuni carburetors | |
| Spark Plug: | NGK, DPR8EA-9 | |
| Ignition: | Bosch EMS with RBW | Digital - Inductive type |
| Max Power: | 23.0 kW / 30.87 hp | 83.9 kW / 115 hp @ 9500 rpm |
| Max Torque: | 25 Nm / 18.4 lb-ft | 87.30 Nm / 8.3 kgf-m / 64.4 ft.lbs @ 6500 rpm |
| Clutch: | PASC antihopping clutch, mechanically operated | Hydraulic |
| Transmission: | 6 Speed | 6 Speed |
| Final Drive: | Chain 520 X-Ring | Chain |
| Frame: | Steel trellis frame, powder coated | Aluminium, twin spar |
| Front Suspension: | WP-APEX Ø 43 mm. | 43 mm Forks with triple rate springs adjustable for compression, rebound damping and spring preload |
| Rear Suspension: | WP-APEX Monoshock | Monoshock with adjustable preload and rebound damping |
| Front Brakes: | Single 320 mm disc, four-piston radial fixed calliper, brake disc | 2 x 310 mm Discs, 6 piston calipers |
| Rear Brakes: | Single 240 mm disc, 2 piston caliper, floating | Single 255 mm disc, 2 piston caliper |
| Front Tyre: | 120/70 ZR17 | |
| Rear Tyre: | 180/55 ZR17 | |
| Trail: | 105 mm / 4.1 in | |
| Seat Height: | 800 mm / 31.5 in | 790 mm / 31.1 in |
| Dry Weight: | 165 kg / 364 lbs | 211 kg / 465 lbs |
| Fuel Capacity: | 25 Litres / 6.6 US gal / 5.4 Imp gal |