Honda CL 350 (1968-69) vs Ducati 600SL Pantah (1981-83)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | Honda | Ducati |
| Model: | CL 350 | 600SL Pantah |
| Years: | 1968-69 | 1981-83 |
| Engine: | Four stroke, Vertical parallel twin aluminum alloy, OHC, 2 valve per cylinder | Four stroke, 90°“L” twin cylinder, SOHC, desmodromic, 2 valves per cylinder, belt driven |
| Capacity: | 325 cc / 19.8 cu-in | 583 cc / 35.6 cu in |
| Bore x Stroke: | 64 X 60.5 mm | 80 x 58 mm |
| Cooling System: | Air cooled | Air cooled |
| Compression Ratio: | 9.3:1 | 10.4:1 |
| Induction: | Two 28 mm variable venturi carburettor | Dell'OrtoPHF36A |
| Ignition: | Contact breaker | Bosch PTZ Electronic |
| Starting: | Electric & kick | Electric |
| Max Power: | 33 hp / 24.1 kW @ 9500 rpm | 44.9 kW / 61 hp @ 9100 rpm |
| Max Torque: | 26.4 Nm / 19.5 lb @ 8000 rpm | 45 Nm / 4.59 kgf-m / 33.2 ft-lb @ 6000 rpm |
| Clutch: | Wet 8 plate 140 mm | Wet, multiplate |
| Transmission: | 5 Speed | 5 Speed |
| Final Drive: | Chain | Chain |
| Frame: | Pressed/tubular semi-double cradle | Tubular steel trellis frame |
| Front Suspension: | Oil damped telescopic fork | 35mm Marzocchi or Paioli fork |
| Rear Suspension: | Pressurized gas damped swing arm | Marzocchi or Paioli dual shock absorbers with 3-way adjustable coil spring |
| Front Brakes: | 180mm Drum, Two leading shoe | 2 x 260 mm Discs, 2 piston calipers |
| Rear Brakes: | 160mm Drum, Single cam | Single 260 mm disc, 1 piston caliper |
| Front Tyre: | 3.00 -19 | 100/90-18 |
| Rear Tyre: | 3.50 -18 | 110/90-18 |
| Rake: | 63.0° | 30o |
| Trail: | 95 mm / 3.7 in | 129.5 mm / 5.1 in |
| Dimensions: | Length 2101 mm / 82.7 in Width 831 mm / 32.7 in Height 1090 mm / 42.9 in | Length: 2150 mm / 84.6 in Width: 660 mm / 26.0 in Height: 1280 mm / 50.4 in |
| Wheelbase: | 1321 mm / 52.0 in | 1450 mm / 57.1 in |
| Seat Height: | 795 mm / 31.3 in | 760 mm / 29.9 in |
| Fuel Capacity: | 9 Litres / 2.4 US gal | 18 L / 4.8 US gal / 4.0 Imp gal |