Moto-Data

Kawasaki Z 400 (2023) vs Husqvarna 701 Enduro (2016-17) vs BMW R 100GS (1987) vs Yamaha RD 350 (1973) vs Yamaha YDS-3C (1966-67)

Comparison technical specifications


Add bike
2023 Kawasaki Z 400
Remove bike
2016 Husqvarna 701 Enduro
Remove bike
1987 BMW R 100GS
Remove bike
1973 Yamaha RD 350
Remove bike
1966 Yamaha YDS-3C
Remove bike
Make: Kawasaki Husqvarna BMW Yamaha Yamaha
Model: Z 400 701 Enduro R 100GS RD 350 YDS-3C
Years: 2023 2016-17 1987 1973 1966-67
Engine: Four stroke, parallel twin, DOHC, 4 valves per cylinder Four stroke, single cylinder, SOHC, 4 valves Four stroke, two cylinder horizontally opposed Boxer, 2 valves per cylinder Two stroke, parallel twin cylinder, reed valves Two stroke, piston-port, parallel twin, Crankshaft supported in four roller bearings; needle-roller small-end and big-end bearings. Light-alloy cylinder head;
Capacity: 399 cc / 24.3 cu-in 690 cc / 42.1 cu in 980 cc / 59.8 cu in. 347 cc / 21.1 cu-in 247 cc / 15.0 cu-in
Bore x Stroke: 70 x 51.8 mm 102 x 84.5 mm 94 x 70.6 mm 64 х 54 mm 56 x 50 mm
Cooling System: Liquid cooled Liquid cooling Air cooled Air cooled Air-cooled
Compression Ratio: 11.5:1 12.6:1 8.5:1 6.6:1 7.5;1
Induction: DFI with 32mm x 2 throttle bodies Keihin EMS with RBW, twin ignition 2 x Bing carburetors 2, Mikuni VM28 SC 2x Mikunis VM24SC with air filter. Direct-operating, coupled air slides.
Ignition: TCBI with digital advance Double ignition Electronic ignition, Bosch Battery, dual coils, breaker points Generator
Starting: Electric Electric Electric Kick Kick
Max Power: 33.4 kW / 45 hp @10000 rpm 49 kW / 67 hp @ 7500 rpm 44 kW / 60 hp @ 6500 rpm 39 hp / 28.5 kW @ 7500 rpm 24 hp @ 7500 rpm
Max Torque: 37 Nm / 27.3 lb-ft @ 8,000 rpm 68 Nm / 44.2 lb-ft @ 6000 rpm 76 Nm / 7.75 kgf-m / 56 ft-lb @ 3750 rpm 24.1 lb-ft / 32.6 Nm @ 7000 rpm 18.1 ft-lb 4.2 kgf-m @ 7500 rpm
Clutch: Wet multi-disc, manual APTC slipper clutch, hydraulically operated Dry single plate, with diaphragm spring Wet, multi-plate Wet, multi-plate clutch mounted on left side of crankshaft
Transmission: 6 Speed Constant mesh, 6-speed 5 Speed 6 Speed 5 Speed Helical-gear primary drive. Rear chain % x %in with top guard. Engine rpm at 30 mph in top gear, approximately 2,500.
Final Drive: Chain Chain X-Ring 5/8 x 1/4" Shaft Chain Chain
Front Suspension: 41mm Telescopic fork 48mm WP 4CS cartridge fork; compression and rebound adjustable Telescopic fork with hydraulic shock absorber. Telescopic forks Telescopic forks with hydraulic damping.
Rear Suspension: Bottom-Link Uni-Trak, gas-charged shock with adjustable preload WP single shock; compression and rebound adjustable Paralever adjustable preload, rebound damping compression Dual shocks Dual shocks swinging arm, Pivoted rear fork controlled by spring-and-hydraulic units with three-position adjustment for load.
Front Brakes: Single 310mm semi-floating petal disc. Caliper: Single balanced actuation dual piston Single 300 mm disc, Brembo four piston, radially bolted calipe Single ∅285mm disc, 2 piston caliper Single 267mm disc 2 piston caliper Drum
Rear Brakes: Single 220 mm petal disc. Caliper: Dual-piston Single 240 mm disc, Brembo single piston, floating caliper ∅200 Drum 178mm Drum Drum
Front Tyre: 110/70R17 M/C 54 H 90/90 - 21 90/90-21 3.00-18 3.00 -18
Rear Tyre: 150/60R17 M/C 66 H 140/80 -18 130/80-17 3.25-18 3.25 -18
Wheelbase: 1370 mm / 53.9 in 1504 ± 15 mm / 59.2 in 1514 mm / 59.6 in 1320.8 mm / 52.0 in 1470.5 mm / 51.9 in
Fuel Capacity: 14 Litres / 3.7 US gal 13.5 Litres / 3.4 US gal 24 L / 6.3 US gal 15.9 Litres / 4.2 gal 11.4 Litres / 3.0 gal