Moto-Data

Kawasaki ER-6n (2013) vs KTM RC 200 (2016) vs BMW R 80RT (1981)

Comparison technical specifications


Add bike
2013 Kawasaki ER-6n
Remove bike
2016 KTM RC 200
Remove bike
1981 BMW R 80RT
Remove bike
Make: Kawasaki KTM BMW
Model: ER-6n RC 200 R 80RT
Years: 2013 2016 1981
Engine: Four stroke, parallel twin, DOHC, 4 valves per cylinder. Four stroke, single cylinder. DOHC with finger followers, 4 Valve per cylinder, Four stroke, two cylinder horizontally opposed Boxer, pushrod operated 2 valves per cylinder.
Capacity: 649 cc / 39.6 cu-in 199.5 cc / 12.1 cu-in 797.5 cc / 48.7 cu in.
Bore x Stroke: 83 X 60 mm 72 x 49 mm 84.8 x 70.6 mm
Cooling System: Liquid cooled, Liquid Cooled Air cooled
Compression Ratio: 11.3;1 14.5:1 9.2:1
Induction: 2x 38mm Electronic Fuel Injection Keihin Bosch Injection 2 x Bing constant depression carburetors
Starting: Electric Electric Electric
Max Power: 53 kW / 72.1 hp @ 8500 rpm 25.4 hp / 18.6 kW @ 10000 rpm 36.4 kW / 50 hp @ 6500 rpm
Max Torque: 66 Nm / 6.7 m-kg @ 7000 rpm 14 lb-ft / 19.2 Nm @8000 rpm 58 Nm / 5.9 kgf-m / 42 ft/lb @ 4000 rpm
Clutch: Wet multi-disc, manual Wet multi-disc clutch / mechanically operated Dry single plate, with diaphragm spring
Transmission: 6 Speed 6 Speed 5 Speed
Final Drive: Chain Chain 5/8 x 1/4” X‑Ring Shaft
Frame: Perimeter, high-tensile steel Tubular space frame made from steel, powder-coated Double loop tubular frame with bolt on rear section
Front Suspension: 41 mm telescopic fork, WP Suspension Up Side Down Telescopic hydraulic fork
Rear Suspension: Offset laydown single-shock with adjustable preload, WP Monoshock BMW Monolever swinging arm
Front Brakes: 2x 300mm discs 2 piston Calipers Single 300 mmdisc Single ∅285mm disc, 1 piston caliper
Rear Brakes: Single 220mm disc 1 piston Caliper Single 230 mm disc ∅200mm Drum
Front Tyre: 120/70ZR17 95/75-R17 100/90-H19
Rear Tyre: 160/60ZR17 115/75-R17 120/90-H18
Fuel Capacity: 16 Litres / 4.2 US gal. 10 Litres / 2.6 US gal 19 Litres / 5.0 US gal