Yamaha DT 125RE (1998) vs Yamaha XJ 900R Seca (1983-84)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | Yamaha | Yamaha |
| Model: | DT 125RE | XJ 900R Seca |
| Years: | 1998 | 1983-84 |
| Engine: | Two stroke, single cylinder, reed-valve | Four stroke, transverse four cylinder, DOHC, 2 valves per cylinder. |
| Capacity: | 123 cc / 7.5 cu-in | 853 cc / 52 cu-in |
| Bore x Stroke: | 56 X 50 mm | 67 х 60.5 mm |
| Compression Ratio: | 6.8:1 | 9.2:1 |
| Induction: | Mikuni 28 SS | 4x 35mm Mikuni carburetor |
| Ignition: | CDI | CDI |
| Starting: | Kick | Electric |
| Max Power: | 14.7 / 10.8 kW @ 7000 rpm | 97 hp / 70.8 Nm @ 9000 rpm |
| Max Torque: | 1.7 kgf-m / 16.3 Nm @ 7000 rpm | 80.2 Nm / 59.3 lb-ft @ 5000 rpm |
| Clutch: | Wet multiplate | Wet, 5 springs |
| Transmission: | 6 speed | 5 Speed |
| Final Drive: | Chain | Shaft |
| Front Suspension: | 41mm Telescopic forks | Air assisted telescopic forks, |
| Rear Suspension: | Monocross linkage | Twin strut gas assisted, 5 spring preload and 12 damping adjustable, |
| Front Brakes: | Single 230mm disc | 2x 254mm discs |
| Rear Brakes: | Single 220mm disc | Single 254mm disc |
| Front Tyre: | 80/90 -21 | 100/90-18 |
| Rear Tyre: | 110/80 -18 | 120/90-18 |
| Wheelbase: | 1415 mm / 55.7 in | 1480 mm / 58.2 in |
| Seat Height: | 885 mm / 34.8 in | 780mm / 30.7 in |
| Ground Clearance: | 270 mm / 10.6 in | 145mm / 5.7 in |
| Fuel Capacity: | 10 Litres / 2.2 gal | 22 Litres / 5.8 US gal |