Kawasaki Z-X10R Ninja (2015) vs Yamaha XT 600Z Ténéré (1985) vs Yamaha FZ 400R (1984) vs Kawasaki Ninja 250R (2011) vs Yamaha FJR 1300ES (2019) vs Victory Hammer 8-Ball (2013-14) vs Buell / EBR Buell XB12XT Ulysses (2010) vs Yamaha XJ 750X Maxim-X (1985-86)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
Remove bike |
Remove bike |
Remove bike |
Remove bike |
Remove bike |
Remove bike |
| Make: | Kawasaki | Yamaha | Yamaha | Kawasaki | Yamaha | Victory | Buell / EBR | Yamaha |
| Model: | Z-X10R Ninja | XT 600Z Ténéré | FZ 400R | Ninja 250R | FJR 1300ES | Hammer 8-Ball | Buell XB12XT Ulysses | XJ 750X Maxim-X |
| Years: | 2015 | 1985 | 1984 | 2011 | 2019 | 2013-14 | 2010 | 1985-86 |
| Engine: | Four stroke, transverse four cylinder, DOHC, 4 valves per cylinder. | Four stroke, single cylinder, SOHC, 4 valve | Four stroke, transverse four cylinder, DOHC, 4 valves per cylinder. | Four stroke . parallel twin, DOHC, 4 valve per cylinder | Four stroke, transverse four cylinder, DOHC, 4 valves per cylinder. | Four stroke, 50° V twin SOHC, 4 valves per cylinder | 45° V-Twin, four stroke, pushrod actuated overhead valve, hydraulic self-adjusting lifters, 2 valve per cylinder. | Four stroke, transverse four cylinder, DOHC, 5 valves per cylinder |
| Capacity: | 998 cc / 60.9 cu-in | 595 cc / 36.3 cu-in | 399 cc / 24.3 cu-in | 248 cc / 15.1 cu-in | 1298 cc / 79.2 cu-in | 1731 cc / 106 cu-in | 1203 cc / 73 cu in | 749 cc / 45.7 cu-in |
| Bore x Stroke: | 76 x 55 mm | 95 x 84 mm | 54 x 43.6 mm | 62 х 41.2mm | 79 x 66.2 mm | 101 x 108 mm | 88.9 x 96.8 mm | 68 x 51.6 mm |
| Compression Ratio: | 13.0:1 | 8.5:1 | 11.5:1 | 11.6:1 | 10.8:1 | 9.4:1 | 10.0:1 | 11.2:1 |
| Cooling System: | Liquid cooled | Air/oil cooled, | Liquid cooled | Liquid cooled | Liquid cooled | Air / oil | Air cooled | Liquid cooled |
| Induction: | DFI® with four 47mm Keihin throttle bodies with oval sub-throttles, two injectors per cylinder | 27mm Dual stage Teikei Y 27 PV carburetor | 4x Mikuni BDST32 carburetors | 2x Keihin CVK30 carburetors | Yamaha Electronic Fuel Injection with YCC-T | Fuel Injection with dual 45mm throttle body | DDFI 3 Electronic Fuel Injection ECM | 4x 33mm Hitachi HSC carburetors |
| Starting: | Electric | Kick | Electric | Electric | Electric | Electric | Electric | Electric |
| Max Power: | 199.8 hp / 147 kW @ 13000 rpm | 46 hp / 34 kW @ 6000 rpm | 50 hp @ 11500 rpm ) | 29.9 hp / 22 kW @ 10500 rpm | 105.7 kW / 146.2 hp @ 8000 rpm | 96.9 hp / 71.3 kW | 86.9 kW / 103 hp @ 6800 rpm | 90 hp / 67.1 kW @ 9000 rpm |
| Max Torque: | 114.3 Nm / 11.62 kg-m @ 1150 rpm | 4.5 kgf-m / 51 Nm @ 5750 rpm | 3.7 kgf-m @ 10000 rpm | 21.7 Nm / 2.21 kgf-m / 16.0 lb-ft @ 10000 rpm | 138 Nm / 14,1kgf-m / 101.8 lb-ft @ 7000 rpm | 153 Nm / 15.6 kg-m | 114 Nm / 11.6 kgf-m / 84 ft-lbs @ 6500 rpm | 72.5 Nm / 53.5 ft-lb @ 8000 rpm |
| Transmission: | 6 Speed | 5 Speed | 6 Speed | 6 Speed | 6 Speed | 6 Speed | 5 Speed | 5 Speed |
| Final Drive: | Sealed Chain | Chain | Chain | O-ring chain | Shaft | Carbon Fiber Reinforced Belt | Belt | Shaft |
| Front Suspension: | 43mm Big Piston Fork (BPF), rebound, compression and spring preload adjustability. | Telescopic air assisted | Telescopic forks | 37mm hydraulic telescopic fork | 48mm Upside-down telescopic fork with adjustable preload, compression and rebound damping (AE/AS/ES: Suspension electronically adjustable) | Inverted cartridge telescopic fork, 43 mm diameter | Showa Ø43 mm inverted forks compression damping, rebound damping and spring preload adjustable | 38mm Telescopic fork, air, coil spring, oil damper |
| Rear Suspension: | Horizontal Back-link. High/low-speed compression, rebound and preload adjustable. 4.9in wheel travel | Monoshock swing arm | Monoshock | Uni-Trak® with aluminum linkage | Single shock, link-type, with adjustable preload and rebound damping (AE/AS/ES: Suspension electronically adjustable) | Single, mono-tube gas, cast aluminum with rising rate linkage, preload adjustable spring | Showa coil-over monoshock, remote underseat reservoir and adjustable compression damping, rebound damping and spring preload | Swing arm, coil spring, oil damper |
| Front Brakes: | 2x 310 mm petal discs, radial-mount 4-piston calliper | Single 260mm disc | 2x 282mm discs | Single 260mm hydraulic petal disc 2 piston caliper | 2 x 320mm discs, 4 piston calipers, unified brake system, ABS | Single 300mm floating rotor 4 piston caliper | ZTL type brake, 6 piston, fixed caliper, Ø375 mm single-sided, inside out, stainless steel, floating rotor | 2x discs 4 piston caliper |
| Rear Brakes: | Single 220mm petal disc | 150mm Drum | Single 210mm disc | Single 220mm petal disc 2 piston caliper | Single 282 mm disc, 2 piston caliper, unified brake system, ABS | Single 300mm floating rotor 2 piston caliper | Single Ø240 mm disc, 1 piston floating caliper | Drum |
| Front Tyre: | 120/70 ZR17 | 3.00-21 | 100/90-16 | 110/70-17 | 120/70 ZR17 | 130/70R18 | 120/70 R17 Pirelli Angel | 100/90-19 57H (90 mm depth) |
| Rear Tyre: | 190/55 ZR17 | 4.60-18 | 120/80-18 | 130/70-17 | 180/55 ZR17 | 250/40R18 | 180/55 R17 Pirelli Angel | 130/90-16 67H (117 mm depth) |
| Fuel Capacity: | 17 Litres / 4.5 US gal | 28 Litres / 7.3 US gal | 18 Litres / 4.75 gal | 18.2 Litres / 5.8 US gal | 25 Litres / 6.6 gal | 17 Litres / 4.5 US gal | 16.7 L / 4.4 US gal | 13 Litres / 3.43 US Gal |