Ducati 1000MHR (Mike Hailwood Replica) (1984) vs Yamaha XV 1900 Raider SE (2015)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | Ducati | Yamaha |
| Model: | 1000MHR (Mike Hailwood Replica) | XV 1900 Raider SE |
| Years: | 1984 | 2015 |
| Engine: | Four stroke, 90°“L”twin cylinder, SOHC, desmodromic 2 valves per cylinder, bevel gear driven | Four stroke, 48° V-Twin cylinder, SOHC, 4 valves per cylinder. |
| Capacity: | 973 cc / 59.4 cu in | 1854 cc / 113 cu-in |
| Bore x Stroke: | 88 x 80 mm | 100 x 118 mm |
| Compression Ratio: | 9.3:1 | 9.5;1 |
| Induction: | 2 x 40 mm Dell'Orto PHM 40B carburetors | Dual 43mm cross bore downdraft throttle body FI |
| Ignition: | Bosch electronic | Electronic control unit (ECU) |
| Starting: | Electric | Electric |
| Max Power: | 55.9 kW 76 hp @ 6700 rpm | 73,6 kW / 100 hp @ 4.250 rpm |
| Max Torque: | 84 Nm / 8.6 kgf-m / 62 ft-lb @ 5800 rpm | 167,8 Nm / 17,1 kgf-m @ 2.500 rpm |
| Transmission: | 5 Speed | 5 Speed |
| Final Drive: | Chain | Belt |
| Front Suspension: | 38 mm Marzocchi oil damped telescopic fork | 46 mm Telescopic fork |
| Rear Suspension: | Marzocchi dual shocks, 5-way spring preload adjustable | Adjustable link Monocross |
| Front Brakes: | 2 x 280 mm Discs, 2 piston calipers | 2x 298 mm discs |
| Rear Brakes: | Single 260 mm disc, 1 piston caliper | Single 310 mm disc |
| Front Tyre: | 110/90 V18 | 120/70-21 |
| Rear Tyre: | 130/90 V18 | 210/40R18 |
| Dimensions: | Length: 2200 mm / 86.6 in Width: 700 mm / 27.6 in Height: 1250 mm / 49.2 in | Length 2570mm / 101.2 in Width 925 mm / 36.4 in Height 1165 mm / 45.9 in |
| Wheelbase: | 1500 mm / 59.1 in | 1800 mm / 70.9 in |
| Seat Height: | 800 mm / 31.5 in | 695 mm / 27.4 in |
| Dry Weight: | 196 kg / 430 lbs | 332 kg / 732 lbs |
| Fuel Capacity: | 18 L / 4.8 US gal / 4.0 Imp gal | 15.9 Litres / 4.2 US gal |