Kawasaki Ninja 650 / ABS (2020) vs Yamaha DT 125E (1978-79)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | Kawasaki | Yamaha |
| Model: | Ninja 650 / ABS | DT 125E |
| Years: | 2020 | 1978-79 |
| Engine: | Four stroke, parallel twin cylinder, DOHC, 4 valves per cylinder | Two stroke, single cylinder, reed-valve |
| Capacity: | 649 cc / 39.65 cu-in | 123 cc / 7.5 cu-in |
| Bore x Stroke: | 83 x 60 mm | 56 х 50 mm |
| Cooling System: | Liquid cooled | Air cooled |
| Compression Ratio: | 10.8:1 | 7.1:1 |
| Lubrication: | Wet sump | Autolube |
| Induction: | DFI with Keihin 36mm Keihin throttle bodies | Single 24 mm Mikuni |
| Ignition: | TCBI with electronic advance | Battery, CB/Coil |
| Starting: | Electric | Electric & kick |
| Max Power: | 50.2 kW / 67.3 hp @ 8,500 rpm | 13 hp / 9.5 kW @ 7000 rpm |
| Max Torque: | 65.7 Nm / 48.4 lb-ft @ 6500 rpm | 1.4 kgf-m / 13.9 Nm @ 6500 rpm |
| Clutch: | Wet multi-disc, manual | Wet multiplate |
| Transmission: | 6 Speed | 6 Speed |
| Final Drive: | O-ring chain | Chain |
| Front Suspension: | 41 mm hydraulic telescopic fork | Telescopic forks |
| Front Wheel Travel: | 125 mm / 4.9 in | 160 mm / 6.2 in |
| Rear Suspension: | Horizontal back-link with adjustable preload | Monocross |
| Rear Wheel Travel: | 130 mm / 5.1 in | 115 mm / 4.5 in |
| Front Brakes: | 2x 300mm discs 2 piston calipers - ABS | Drum |
| Rear Brakes: | Single 220mm disc - ABS | Drum |
| Front Tyre: | 120/70 -17 | 2.75-21 |
| Rear Tyre: | 160/60 -17 | 3.25-18 |
| Dimensions: | Length 2055 mm / 80.9 in Width 740 mm / 29.1 in Height 1135 mm / 44.6 in | Length 2030 mm / 79.8 in Width 860 mm / 33.8 in Height 1090 mm / 42.9 in |
| Wheelbase: | 1410 mm / 55.5 in | 1325 mm / 52.2 in |
| Seat Height: | 790 mm / 31.1 in | 820 mm / 32.2 in |
| Ground Clearance: | 130 mm / 5.1 in | 250 mm / 9.8 in |
| Fuel Capacity: | 15 Litres / 3.9 US gal | 7.0 Litres / 1.58 gal |