Royal Enfield Bullet 500 Trials Works Replica (2019) vs Victory Kingpin 8 Ball (2008)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | Royal Enfield | Victory |
| Model: | Bullet 500 Trials Works Replica | Kingpin 8 Ball |
| Years: | 2019 | 2008 |
| Engine: | Four stroke, single cylinder, OHV | Four stroke, 50° V twin SOHC, 4 valves per cylinder |
| Capacity: | 499 cc / 30.4 cu-in | 1634 cc / 100 cu-in |
| Bore x Stroke: | 84 x 90 mm | 101 x 102 mm |
| Cooling System: | Air Cooled | Air / oil |
| Compression Ratio: | 8.5:1 | 9.8:1 |
| Induction: | Electronic fuel injection (EFI) | Electronic Fuel Injection with 44mm throttle bodies |
| Starting: | Electric & Kick | Electric |
| Clutch: | Wet, multiplate | Wet, multi-plate |
| Transmission: | 5 Speed, constant mesh | 6 Speed |
| Final Drive: | Chain | Carbon Fiber Reinforced Belt |
| Front Suspension: | 35mm Hydraulic telescopic fork | 43mm Inverted cartridge telescopic fork |
| Front Wheel Travel: | 130 mm / 5.1 in | 130 mm / 5.1 in |
| Rear Suspension: | Twin shocks, gas charged with 5-step adjustable preload | Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage |
| Rear Wheel Travel: | 80 mm / 3.1 in | 100 mm / 3.9 in |
| Front Brakes: | Single 280mm disc, 2 piston caliper, ABS | Single 300mm floating rotor 4 piston caliper |
| Rear Brakes: | 240 mm disk, 1 piston floating caliper, ABS | Single 300mm floating rotor 2 piston caliper |
| Front Tyre: | 90/90-19 - 52 P | 130/70 -21 |
| Rear Tyre: | 110/80-18 - 62 P | 180/55 B18 |
| Seat Height: | 800 mm / 31.5 in | 673 mm / 26.5 in |
| Fuel Capacity: | 13.5 Litres / 29.7 US gal | 17 Litres / 4.5 US gal |