Triumph Scrambler (2010) vs Ducati 125 Scrambler (1971-72) vs Kawasaki EL 252 Eliminator (1995-98) vs Ducati 48 Rolly (1968) vs Husqvarna 701 Enduro (2021) vs Victory Kingpin (2004-05)

Comparison technical specifications

Add bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike	Remove bike
Make:	Triumph	Ducati	Kawasaki	Ducati	Husqvarna	Victory
Model:	Scrambler	125 Scrambler	EL 252 Eliminator	48 Rolly	701 Enduro	Kingpin
Years:	2010	1971-72	1995-98	1968	2021	2004-05
Engine:	Four stroke, parallel-twin, DOHC	Four stroke, single-cylinder, OHC, bevel gear driven	Four stroke, parallel twin cylinder, DOHC, 4 valves per cylinder.	Two stroke, single cylinder, piston-port	Four stroke, single cylinder, SOHC, 4 valves	Four stroke, 50° V twin SOHC, 4 valves per cylinder, self-adjusting cam chains, hydraulic lifters
Capacity:	865 cc / 52.8 cu in	124.4 cc / 7.6 cu in	253 cc / 15.4 cu-in	47.6 cc / 2.9 cu in	692.7 cc / 42.27 cu in	1507 cc / 91.9 cu-in
Bore x Stroke:	90 x 68 mm	55.2 x 52 mm	62.5 x 41.2 mm	38 x 42 mm	105 x 80 mm	97 x 102 mm
Cooling System:	Air-cooled	Air cooled	Liquid cooled	Air cooled	Liquid cooling	Air/oil cooled
Induction:	Multipoint sequential electronic fuel injection with SAI	Amal 375/20 carburetor	Carburetor	Dell'Orto UA18S	Keihin EFI with 50mm throttle body	Electronic Fuel Injection with 44mm throttle bodies
Starting:	Electric	Kick	Electric	Kick	Electric	Electric
Transmission:	5 Speed	5 Speed	6 Speed	Single speed	6 Speed with quickshifter	5 Speed
Final Drive:	X-ring chain	Chain	Chain	Chain	Chain X-Ring 5/8 x 1/4 in	Carbon Fiber Reinforced Belt
Front Suspension:	41mm Telescopic forks	Hydraulically damped telescopic fork, Marzocchi	Telescopic forks	Telescopic fork	48mm Fully adjustable WP Xplor inverted forks	Inverted cartridge telescopic fork
Rear Suspension:	Chromed spring twin shocks with adjustable preload	Swingarm, dual shocks, 3-way adjustable	Dual shocks	Rigid, spring loaded saddle	Linkage-assisted fully adjustable WP Xplor shock	Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage 100mm wheel travel, preload adjustable spring
Front Brakes:	Single 310 mm disc, Nissen 2 piston floating caliper	158 Drum	Single 226mm disc 1 piston caliper	Drum, 90 mm	Single 300 mm disc, Brembo floating caliper, 2 piston	Single 300mm floating rotor 4 piston caliper
Rear Brakes:	Single 255 mm disc, Nissen 2 piston floating caliper	136 Drum	Drum	Drum, 90 mm	Single 240 mm disc, Brembo single piston, floating caliper	Single 300mm floating rotor 2 piston caliper