Triumph Thruxton (2003-04) vs Victory Hammer S (2009-10)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | Triumph | Victory |
| Model: | Thruxton | Hammer S |
| Years: | 2003-04 | 2009-10 |
| Engine: | Four stroke, parallel twin cylinder, DOHC, 4 valves per cylinder | Four stroke, 50° V twin SOHC, 4 valves per cylinder |
| Capacity: | 865 cc / 57.8 cu in | 1731 cc / 106 cu-in |
| Bore x Stroke: | 88.9 x 68.6 mm | 101 x 108 mm |
| Cooling System: | Air-cooled | Air / oil |
| Compression Ratio: | 9.9:1 | 9.4:1 |
| Induction: | Twin carburetors, with throttle position sensor and electric carburettor heaters | Fuel Injection with dual 45mm throttle body |
| Starting: | Electric | Electric |
| Max Power: | 51.5 kW / 69 hp @ 7250 rpm | 96.9 hp / 71.3 kW |
| Max Torque: | 71.8 Nm / 7.3 kgf-m / 53ft.lbf @ 5750 rpm | 153 Nm / 15.6 kg-m |
| Clutch: | Wet, multi-plate | Wet, multi-plate |
| Transmission: | 5 speed | 6 Speed |
| Final Drive: | X-ring chain | Carbon Fiber Reinforced Belt |
| Front Suspension: | 41 mm Forks with adjustable preload | Inverted cartridge telescopic fork, 43 mm diameter |
| Rear Suspension: | Chromed spring twin shocks with adjustable preload | Single, mono-tube gas, cast aluminum with rising rate linkage, preload adjustable spring |
| Front Brakes: | Single 320mm floating disc, 2 piston caliper | Single 300mm floating rotor 4 piston caliper |
| Rear Brakes: | Single 255mm disc, 2 piston caliper | Single 300mm floating rotor 2 piston caliper |
| Front Tyre: | 100/90 R18 | 130/70R18 |
| Rear Tyre: | 130/80 R17 | 250/40R18 |
| Trail: | 97 mm / 3.8 in | 140 mm / 5.5 in |
| Dimensions: | Length 2212 mm / 87.1 in Width 714 mm / 28.1 in Handlebars Height 1170 mm / 46.4 in | Length 93.8 in / 2382 mm |
| Wheelbase: | 1477 mm / 58.1 in | 1689 mm / 66.5 in |
| Seat Height: | 790 mm / 31.1 in | 660 mm / 26 in |
| Dry Weight: | 205 kg / 451 lbs | 305 kg / 672 lbs |
| Fuel Capacity: | 16 Litres / 4.2 US gal / 3.5 Imp gal | 17 Litres / 4.5 US gal |