Moto-Data

Honda CB 650 (1980) vs Kawasaki ZR-X 400 (1993-95) vs Triumph Tiger 800 (2012)

Comparison technical specifications


Add bike
1980 Honda CB 650
Remove bike
1993 Kawasaki ZR-X 400
Remove bike
2012 Triumph Tiger 800
Remove bike
Make: Honda Kawasaki Triumph
Model: CB 650 ZR-X 400 Tiger 800
Years: 1980 1993-95 2012
Engine: Four stroke, transverse four cylinder, SOHC, 2 valves per cylinder. Four stroke parallel twin cylinder. DOHC, 2 valves per cylinder Four stroke, transverse three cylinder, DOHC, 4 valve per cylinder
Capacity: 626.8 cc / 38.2 cu-in 399 cc / 24.4 cu-in 799 cc / 48.7 cu-in
Bore x Stroke: 59.8 x 55.8 mm 57.5 х 38.5 mm 74 x 61.9 mm
Cooling System: Air cooled. Liquid cooled Liquid cooled
Compression Ratio: 9.0:1 11.2:1 12.0:1
Induction: 4x 26mm Keihin carburetors 4x Keihin CVK30 carburetors Multipoint sequential electronic fuel injection
Ignition: Transistorized Battery & coil Digital CDI
Starting: Electric Electric Electric
Max Power: 63 hp / 46.9 kW @ 9000 rpm 62 hp / 46.2 kW @ 11500 rpm 69.1 kW / 93.9 hp @ 9300 rpm
Max Torque: 51.5 Nm / 38 ft-lb @ 8000 rpm 37 Nm / 27.3 lb-ft @ 9000 rpm 79 Nm / 8.1 kgf-m /58 ft.lb @ 7850 rpm
Transmission: 5 Speed 6 Speed 6 Speed
Final Drive: Chain Chain Chain
Front Suspension: Centre axle coil spring forks 39mm RWU telescopic forks Showa 45mm upside down forks
Rear Suspension: Dual Showa dampers. adjustable spring preload. Dual shocks preload adjustment Showa monoshock with remote oil reservoir, hydraulically adjustable preload, rebound damping adjustment
Front Brakes: Single 275mm discs 1 piston calipers 2x 298mm discs 6 piston calipers 2 x 308 mm Floating discs, Nissin 2-piston floating caliper (ABS available), Nissin master cylinder, 14mm diameter
Rear Brakes: 180mm Drum Single 240mm disc 2 piston caliper Single 255 mm disc, Nissin single-piston floating caliper (ABS available)
Front Tyre: 3.50-19 110/80-17 110/80 ZR19
Rear Tyre: 4.50-17 150/70-18 150/70 ZR17
Fuel Capacity: 18 Litres / 4.7 US gal 16 Litres / 4.2 US gal 18.9 Litres / 5.0 gal / 4.2 Imp gal