KTM 890 Duke R (2022) vs Triumph Daytona 675R (2011)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | KTM | Triumph |
| Model: | 890 Duke R | Daytona 675R |
| Years: | 2022 | 2011 |
| Engine: | Four stroke, parallel twin cylinder, DOHC, 4 valve per cylinder | Four stroke, in-line 3-cylinder, DOHC, 4 valve per cylinder. |
| Capacity: | 889 cc / 54.2 cu-in | 675 cc / 41.2 cub in. |
| Bore x Stroke: | 90.7 x 68.8 mm | 76 x 49.6 mm |
| Cooling System: | Liquid cooled with water/oil heat exchanger | Liquid-cooled |
| Compression Ratio: | 13.5:1 | 12.7:1 |
| Exhaust: | Stainless steel primary and secondary silencer | Stainless steel 3 into 1 system with valve in secondary and under engine silencer |
| Lubrication: | Forced oil lubrication with 2 oil pumps | Wet sump |
| Induction: | DKK DellOrto fuel-Injection throttle body 46mm | Multipoint sequential electronic fuel injection with forced air induction and SAI |
| Starting: | Electric | Electric |
| Max Power: | 121 hp / 89 kW @ 9250 rpm | 93 kW / 124 hp @ 12600rpm |
| Max Torque: | 99 Nm / 73 lb-ft @ 7750 rpm | 72 Nm / 7.3 kgf-m / 53 ft/lb @ 11750rpm |
| Clutch: | PASC antihopping clutch, mechanically operated | Wet, multi-plate, slipper |
| Transmission: | 6 Speed | 6 Speed |
| Final Drive: | Chain 520 X-Ring | O-ring chain |
| Frame: | Chromium-Molybdenum-Steel frame using the engine as stressed element, powder coated | Running Gear and Displays, Aluminium beam twin spar. Rear - 2 piece high pressure die cast Swingarm Braced, twin-sided, aluminium alloy with adjustable pivot position |
| Front Suspension: | 43mm WP APEX upside-down forks | Öhlins 43mm upside down NIX30 forks with adjustable preload, rebound and compression damping |
| Front Wheel Travel: | 140 mm / 5.5 in | 110 mm / 4.3 in |
| Rear Suspension: | WP APEX Monoshock | Öhlins TTX36 twin tube monoshock with piggy back reservoir, adjustable preload, rebound and compression damping, |
| Rear Wheel Travel: | 150 mm / 5.9 in | 130 mm / 5.1 in |
| Front Brakes: | 2x 320mm discs, Brembo Stylema monobloc 4 piston, radially mounted caliper | 2 x 308 mm Discs, 4 piston calipers, Brembo |
| Rear Brakes: | Single 240mm disc, Brembo 1 piston floating calliper | Single 220 mm disc, 1 piston caliper, Brembo |
| Front Wheel: | Cast aluminium wheels 3.50 X 17 | Front Cast aluminium alloy 5-spoke 17 x 3.5in |
| Rear Wheel: | Cast aluminium wheels 5.50 X 17 | Rear Cast aluminium alloy 5-spoke 17 x 5.5in |
| Front Tyre: | 120/70 ZR 17 | 120/70 ZR 17 |
| Rear Tyre: | 180/55 ZR 17 | 180/55 ZR 17 |
| Rake: | 24.3° | 23.9º |
| Trail: | 99.7 mm / 3.9 in | 87.2 mm / 3.4 in |
| Wheelbase: | 1481 mm / 58.3 in | 1395mm / 54.9 in |
| Seat Height: | 834 mm / 32.8 in | 820 mm / 32.3 in |
| Fuel Capacity: | 14 Litres / 3.7 US gal | 17.5 Litres / 4.6 US gal / 3.8 Imp gal |