Junak M07 (1956-59) vs SYM Fiddle II 50 (2014)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | Junak | SYM |
| Model: | M07 | Fiddle II 50 |
| Years: | 1956-59 | 2014 |
| Engine: | Four stroke, single cylinder, OHV | Single cylinder, 4-stroke, SOHC |
| Capacity: | 349 cc / 21.3 cub. in. | 49.5 cc / 3.0 cub in. |
| Compression Ratio: | 7.0:1 | 11.8:1 |
| Lubrication: | Dry-sump | Dry sump |
| Ignition: | Magneto | CDI |
| Battery: | 14 Ah, 6V | 12V 6 Ah |
| Starting: | Kick-start | Electric & kick |
| Clutch: | Multi-plate clutch with cork inserts working in an oil bath | Centrifugal |
| Max Power: | 14 kW / 19 hp @ 6000 rpm | 2.35 kW / 3.2 hp @ 8500 rpm |
| Max Torque: | 27.5 Nm / 2.8 kgf-m / 20.3 ft-lb @3800 rpm | 2.91 Nm / 0.30 kgf-m / 2.15 ft/lbs @ 6500 rpm |
| Transmission: | Four-speed constant-mesh | CVT |
| Final Drive: | Chain | Belt |
| Frame: | Double, cradle-type, welded throughout of tubing, provided with holders for side car mounting. | Pipe under bone, steel |
| Front Suspension: | Telescopic fork with coil springs and oil damping | Telescopic fork |
| Rear Suspension: | Swinging arm sprung on telescopic elements with coil springs and oil damping. | Twin sided swing arm |
| Front Brakes: | Full hub width, of expander shoe type, hand operated | Hydraulic disc, 180 mm |
| Rear Brakes: | Full hub width, of expander shoe type, foot operated | Drum, 130 mm |
| Wheels: | Wire type, with full width hubs made of light alloy, interchangeable (also with side-car wheel). Both wheels with quick-detachable spindles | Aluminium |
| Front Tyre: | 19 in | 110/70-12 tubeless |
| Rear Tyre: | 19 in | 120/70-12 tubeless |
| Dimensions: | Length: 2172 mm / 85.5 in Width: 740 mm / 29.1 in Height: 1095 mm / 43.1 in | Length: 1870 mm / 73.6 in. Width: 695 mm / 27.4 in. Height: 1150 mm / 45.3 in. |
| Fuel Capacity: | 17 l / 3.9 US gal | 5.2 L / 1.4 US gal |