Moto-Data

Honda VFR 400R NC30 (1990) vs Piaggio Fly 150 (USA) (2014) vs Harley-Davidson Harley Davidson FLSTC Heritage Softail Classic (2009) vs BMW K100 (1986-90)

Comparison technical specifications


Add bike
1990 Honda VFR 400R NC30
Remove bike
2014 Piaggio Fly 150 (USA)
Remove bike
2009 Harley-Davidson Harley Davidson FLSTC Heritage Softail Classic
Remove bike
1986 BMW K100
Remove bike
Make: Honda Piaggio Harley-Davidson BMW
Model: VFR 400R NC30 Fly 150 (USA) Harley Davidson FLSTC Heritage Softail Classic K100
Years: 1990 2014 2009 1986-90
Engine: Four stroke 90°V-four cylinder, DOHC, 4 valves per cylinder Four stroke, single cylinder, SOHC, 3 valve Four stroke, 45° V-Twin, Twin Cam 96 vibration isolation-mounted Valves Pushrod-operated overhead valves; w/ hydraulic self-adjusting lifters; two valves per cylinder Four stroke, horizontal in line four cylinder, DOHC, 2 valves per cylinder
Capacity: 399 cc / 15.7 cu-in 150 cc / 9.2 cub in. 1584 cc / 96 cu-in 987 cc / 60.2 cub. in
Bore x Stroke: 55 x 42 mm 57.9 x 58.4 mm 95.2 x 111.2 mm 67 x 70 mm
Cooling System: Liquid cooled Forced air Air cooled Liquid cooled
Ignition: Digitalized full transistor ignition Electronic Single-fire, non-wasted, map-controlled spark ignition Electronic injection, Bosch LE-Jetronic
Max Torque: 39 Nm / 4.0 kgf-m / 28.8 lb-ft @ 10000 rpm 13 Nm / 1.33 kgf-m / 9.6 lb-ft. @ 6000 rpm 124.7 Nm / 92 ft. lbs @ 3000 rpm 86 Nm / 8.8 kgf-m / 63 ft-lb
Transmission: 6 Speed CVT, with ratio variator 6 Speed 5 Speed
Frame: Twin-spar aluminum Single cradle, high-strength steel tubes Mild steel, tubular frame; rectangular section backbone; stamped, cast and forged junctions, forged fender supports; MIG welded Tubular space frame, engine serving as load bearing component
Front Suspension: 41mm inverted forks: preload and rebound damping Telescopic fork, 32 mm 41.3 mm telescopic, “beer can” covers Telescopic fork with hydraulic shock absorber
Rear Suspension: Rising-rate monoshock: pre-load and rebound damping Single hydraulic shock absorber, 73 mm Hidden, horizontal-mounted, coil-over shock Monolever swinging arm
Front Brakes: 2x 269mm 4 piston calipers Single, 220 mm disc, dual piston, floating caliper Single 292mm disc 4 piston caliper 2 x ∅285 mm discs, 2 piston calipers
Rear Brakes: Single disc 2 piston caliper Drum, 140 mm Single 292mm disc 4 piston caliper Single ∅285 mm disc, 1 piston caliper
Front Tyre: 100/90 R16 120/70 - 12 in. MT90B16 72H 100/90-18
Rear Tyre: 140/60 R18 120/70 - 12 in. 150/80B16 71H 130/90-17
Dimensions: Height 1075 mm / 42.3 in Length 1985 mm / 78.1 in Length: 1849 mm / 72.8 in. Width: 704 mm / 27.7 in. Length 2400.3 mm / 94.5 in Width 995.0 mm / 39.2 in Height 1120.0 mm / 44.1 in Length 2220 mm / 87.4 in Width 960 mm / 37.8 in Height 1155 mm / 45.5 in
Wheelbase: 1345 mm / 53.0 in 1326 mm / 52.2 in. 1638 mm / 64.5 in 1516 m /59.7 in.
Seat Height: 870 mm / 30.7 in 785 mm / 30.9 in. Laden2 647.7 mm / 25.5 in Unladen 697 mm / 27.4 in. 810 mm / 31.90 in.
Fuel Capacity: 18 Litres / 4.0 gal 7.2 L / 1.9 US gal 18 9 Litres / 5.0 US gal 22 Liters / 5.8 US gal