Suzuki Intruder M800 (2010-11) vs Suzuki DR-Z 400S (2000-01)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | Suzuki | Suzuki |
| Model: | Intruder M800 | DR-Z 400S |
| Years: | 2010-11 | 2000-01 |
| Engine: | Four stroke, 45° V-Twin | Four stroke, single cylinder, DOHC, 4 valve |
| Capacity: | 805 cc / 49.1 cu in | 398 cc / 24.3 cu-in |
| Bore x Stroke: | 83 x 74.4 mm | 90 x 62.6 mm. |
| Compression Ratio: | 9.4:1 | 11.3:1 |
| Cooling System: | Liquid cooled | Liquid cooled |
| Induction: | Electronic fuel injection | Mikuni BSR36 carburetor |
| Ignition: | Electronic | Digital CDI |
| Starting: | Electric | Electric |
| Max Power: | 39 kW / 53 hp @ 6000 rpm | 29.2 kW / 39.7 hp @ 8500 rpm |
| Max Torque: | 66.4 Nm / 6.8 kgf-m / 49 lb-ft @ 4000 rpm | 39 Nm / 3.98 kg-m / 28.8 lb-ft @ 6600 rpm |
| Clutch: | Wet, multi-plate | Wet, multiple discs, cable operated |
| Transmission: | 5 Speed | 5 Speed |
| Final Drive: | Shaft | Chain, #520 |
| Front Suspension: | Inverted telescopic, coil spring | Telescopic, 49 mm, oil-damped, 11-way compression damping, adjustable spring preload |
| Rear Suspension: | Link type, oil damped, coil spring, spring preload 7-way adjustable | Link-type, fully adjustable spring preload, 26-way compression damping |
| Front Brakes: | Single 300 mm disc, 2 piston caliper | Single 250mm disc, 2 piston caliper |
| Rear Brakes: | 180mm Drum | Single 220mm disc, 1 piston caliper |
| Front Tyre: | 130/90-16 | 80/100-21 |
| Rear Tyre: | 170/80-15 | 120/90-18 |
| Dimensions: | Length: 2395 mm / 94.3 in Width: 890 mm / 35.0 in Height: 1130 mm / 44.5 in | Length 2310 mm / 90.9 in Width 875 mm / 34.4 in. Height 1230 mm / 48.4 in |
| Wheelbase: | 1655 mm / 65.2 in | 1485 mm / 58.5 in |
| Ground Clearance: | 140 mm / 5.5 in | 300 mm / 11.8 in |
| Seat Height: | 700 mm / 27.6 in | 935 mm / 36.8 in |
| Fuel Capacity: | 15.5 Litres / 4.1 US gal / 3.4 Imp gal | 10 Litres / 2.6 US gal / 2.2 Imp gal |