MV Agusta F4RR (2013)
Comparison technical specifications
Add bike |
Remove bike |
| Make: | MV Agusta |
| Model: | F4RR |
| Years: | 2013 |
| Engine: | Four stroke, transverse four cylinder. DOHC, 4 radial valves per cylinder |
| Capacity: | 998 cc / 60.9 cu-in |
| Bore x Stroke: | 76 x 55 mm |
| Compression Ratio: | 13.4:1 |
| Cooling System: | Liquid cooled, |
| Lubrication: | Wet sump |
| Engine Management: | Integrated ignition - injection system MVICS (Motor & Vehicle Integrated Control System) with eight injectors Engine control unit Eldor EM2.0, throttle body full drive by wire Mikuni, pencil-coil with ion-sensing technology, control of detonation and misfire, Torque control with four maps, Traction Control with eight levels of intervention with lean angle sensor, EAS |
| Electronically: | Assisted Shift - TSS Torque Shift System employing variable length intake runners |
| Alternator: | 350 W at 5000 r.p.m. |
| Battery: | 12 V - 8.6 Ah |
| Starting: | E lectric |
| Max Power: | 143.5 kW / 195 hp @ 13400 rpm |
| Max Torque: | 110.8 Nm / 11.3 kgm @ 9600 rpm |
| Clutch: | Wet, multi-disc with back torque limiting device |
| Transmission: | Cassette styl 6 Speed |
| Final Drive: | Chain |
| Primary Drive: | 48/82 |
| Gear Ratio: | 1st: Speed 14/37 2nd : Speed 16/33 3rd Speed 18/31 4th Speed 20/30 5th Speed 22/29 6th Speed 21/25 |
| Final Drive Ratio: | 15/41 |
| Frame: | Type CrMo Steel tubular trellis Rear swing arm pivot plates material Aluminium alloy |
| Front Suspension: | 43mm Öhlins EC Nix hydraulic "UPSIDE DOWN" front forks with TiN superficial treatment. Completely adjustable electronically controlled compression and rebound damping with manual, spring preload |
| Front Wheel Travel: | 120 mm / 4.72 in |
| Rear Suspension: | Progressive, single shock absorber Öhlins TTX. Fully adjustable hydraulic electronically controlled compression and rebound damping with manual, spring preload Single sided swing arm material Aluminium alloy |
| Rear Wheel Ttavel: | 120 mm / 4.72 in |
| Front Brakes: | 2x floating 320mm discs and aluminium flange, Front brake caliper Brembo radial-type, single-piece with 4 pistons Ø 34 mm (Ø 1.34 in.) |
| Rear Brakes: | Single 210mm disc Nissin with 4 pistons caliper |
| Rim Front: | Aluminium alloy 3,50 in x 17 in |
| Rim Rear: | Aluminium alloy 6,00 in x 17 in |
| Front Tyre: | 120/70 ZR17 |
| Rear Tyre: | 200/55 ZR17 |
| Trail: | 100,4 mm / 3.9 in |
| Dimensions: | length 2115 mm / 83.3 in Width 750 mm / 29.5 in |
| Wheelbase: | 1430 mm / 56.2 in |
| Seat Height: | 830 mm / 2.6 in |
| Ground Clearance: | 115 mm / 4.7 in |
| Dry-Weight: | 190 Kg / 418.9 lbs |
| Fuel Capacity: | 17 Litres / 4.49 US gal |