Husqvarna TE 610e (1997-99) vs Moto Guzzi V7 II Special (2015-16)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | Husqvarna | Moto Guzzi |
| Model: | TE 610e | V7 II Special |
| Years: | 1997-99 | 2015-16 |
| Engine: | Four stroke, single cylinder, SOHC, 4 valves | Four stroke, V twin, longitudinally mounted, OHV, 2 valves with light alloy pushrods and rockers |
| Capacity: | 576 cc / 35.2 cu-in | 744 cc / 45.4 in |
| Bore x Stroke: | 98.0 x 76.4 mm | 80 x 74 mm |
| Cooling System: | Liquid cooled | Air cooled |
| Compression Ratio: | 11.0:1 | 9.6:1 |
| Induction: | 41mm Keihin FCR MX | Weber- Marelli electronic injection |
| Ignition: | CDI Adjustable advance | Magneti Marelli electronic digital |
| Starting: | Electric | Electric |
| Max Power: | 53 hp / 38.3 kW @ 7000 rpm | 35 kW / 48 hp @ 6200 rpm |
| Max Torque: | 52 Nm / 36.8 lb-ft @ 6800 rpm | 58 Nm / 40.3 lb-ft @ 5000 rpm |
| Clutch: | Wet, multiplate type, hydraulic control | Single disc, dry, with cush drive |
| Transmission: | 6 Speed | 6 Speed |
| Final Drive: | Chain | Shaft |
| Frame: | Steel single tube cradle (round tubes); rear frame in light alloy | Detachable tubular duplex cradle |
| Front Suspension: | 45mm Marzocchi "Upside-Down" telescopic hydraulic fork with advanced axle. compression and rebound stroke adjustment | Marzocchi Ø 40 mm telescopic front forks |
| Rear Suspension: | Sachs progressive "Soft Damp" type with single hydraulic shock absorber, spring preload adjustment, compression and rebound adjustment | Die cast light alloy swing arm with 2 shock absorbers with adjustable spring preload |
| Front Brakes: | Single 260mm disc | Single 320mm disc 2 piston caliper |
| Rear Brakes: | Single 220mm disc | Single 260mm disc 2 piston caliper |
| Front Tyre: | 90/90 -21 | 100/70-18 |
| Rear Tyre: | 140/80 -18 | 130/80-17 |
| Wheelbase: | 1485 mm / 58.5 in | 1435 mm / 56.5 in |
| Seat Height: | 860 mm / 33.9 in | 790 mm / 31.1 in |
| Fuel Capacity: | 9 Litres / 2.4 US gal | 22 Litres / 5.8 US gal |