Gilera MX-1 125 (1988) vs Moto Guzzi V7 Café Racer Kit (2015)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | Gilera | Moto Guzzi |
| Model: | MX-1 125 | V7 Café Racer Kit |
| Years: | 1988 | 2015 |
| Engine: | Two stroke, single cylinder, reed valve | Four stroke, V twin, longitudinally mounted, OHV, 2 valves with light alloy pushrods and rockers. |
| Capacity: | 124 ccc / 7.6 cu-in | 744 cc / 45.4 in |
| Bore x Stroke: | 56 x 50.5 mm | 80 x 74 mm |
| Cooling System: | Liquid cooled | Air cooled |
| Compression Ratio: | 13.0;1 | 9.6:1 |
| Induction: | 28 Dell'Orto PHBH carburetors | Weber- Marelli electronic injection |
| Ignition: | Electric ignition with capacitive output | Magneti Marelli electronic digital |
| Starting: | Electric | Electric |
| Max Power: | 29.3 hp / 21.8 kW @ 9900 rpm | 35 kW / 48 hp @ 6200 rpm |
| Max Torque: | 18 Nm / 13.2 lb-ft @ 10250 rpm | 58 Nm / 40.3 lb-ft @ 5000 rpm |
| Clutch: | Multi-disc oil bath | Single disc, dry, with cush drive |
| Transmission: | 6 Speed | 6 Speed |
| Final Drive: | Chain | Shaft |
| Front Suspension: | 35mm Marzocchi telescopic-hydraulic forks | Marzocchi Ø 40 mm telescopic front forks |
| Front Wheel Travel: | 130 mm / 5.1 in | 130 mm / 5.1 in |
| Rear Suspension: | Fork in die cast aluminium, Boge single shock absorber fork in die cast aluminium, Boge single shock absorber | Die cast light alloy swing arm with 2 shock absorbers with adjustable spring preload |
| Front Brakes: | Single 260mm disc | Single 320mm disc 2 piston caliper |
| Rear Brakes: | Single 240mm disc | Single 260mm disc 2 piston caliper |
| Front Tyre: | 100/90-16 | 100/70-18 |
| Rear Tyre: | 120/80-16 | 130/80-17 |
| Wet Weight: | 132 kg / 291 lbs | 189 kg / 416.6 lbs |
| Fuel Capacity: | 17 Litres / 4.5 US gal | 22 Litres / 5.8 gal |