Honda CR 500 (1986) vs Magni Australia (1994)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | Honda | Magni |
| Model: | CR 500 | Australia |
| Years: | 1986 | 1994 |
| Engine: | Two stroke, single cylinder, membrane & power valve | Four stroke, 90°transverse V-twin, OHC, 4 valves per cylinder |
| Capacity: | 491.4 cc / 29.9 cu-in | 992 cc / 60.5 cu-in |
| Bore x Stroke: | 89.0 x 79.0 mm | 90 x 78 mm |
| Compression Ratio: | 6.8:1 | 10.0:1 |
| Cooling System: | Liquid cooled | Air cooled |
| Induction: | Single 38mm Keihin flat-slide carburettor | Weber-Marelli EFI |
| Ignition: | CDI | Electronic injection |
| Max Power: | 64.6 hp / 47.5 kW @ 6000 rpm | 75 kW / 102 hp @ 8400 rpm |
| Max Torque: | 72.2 Nm / 53.3 lb-ft @ 6000 rpm | 88 Nm / 65 lb-ft @ 6600 rpm |
| Transmission: | 5 Speed | 5 Speed |
| Front Suspension: | 46mm Showacartridge fork | FI Upside-down fully adjustable |
| Rear Suspension: | Showa Prolink with adjustable compression/rebound dampening | WP Parallelogrammo |
| Front Brakes: | Single disc hydraulic 2 piston caliper | 2x 320mm disc |
| Rear Brakes: | Drum | Single 230mm disc |
| Front Tyre: | 3.00-21 | 120/70-VR17 |
| Rear Tyre: | 5.10-18 | 180/55-VR17 |
| Dry Weight: | 102.1 kg / 225.0 lbs | 200 kg / 441 lbs |
| Fuel Capacity: | 9 Litres / 2.38 US gal | 23 Litres / 6.0 US gal |