MV Agusta 350 Sport B Elettronica (1972-74) vs KTM 640 LC4 Enduro (2003-04)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | MV Agusta | KTM |
| Model: | 350 Sport B Elettronica | 640 LC4 Enduro |
| Years: | 1972-74 | 2003-04 |
| Engine: | Four stroke, 20° inclination parallel twin cylinder, OHV engine with rocker support | Four stroke, single Cylinder. SOHC, 4 valves, engine balancer |
| Capacity: | 349 cc / 21.3 cu-in | 624.6 cc / 38.1 cu in |
| Bore x Stroke: | 63 x 56 mm | 101 x 78 mm |
| Cooling System: | Air cooled | Liquid cooled |
| Compression Ratio: | 9.5:1 | 11.5:1 |
| Lubrication: | Wet sump | 2 x Eaten oil pumps |
| Induction: | Dell’ Orto UB 24 BS2, UB 24 B2 carburetors | Mikuni BST 40 carburetor |
| Ignition: | Electronic | Kokusan contactless DC-CDI ignition with advanced system |
| Starting: | Kick | Electric & kick |
| Max Power: | 32 hp / 23.4 kW @ 7600 rpm | 40.1 kW / 55 hp @ 7000 rpm |
| Clutch: | Wet multiple plate clutch | Multi-disc in oil bath |
| Transmission: | 5 Speed | 5 Speed |
| Final Drive: | Chain | Chain, O-ring 5/8 x 1/4" |
| Frame: | single beam tubular and pressed steel | Central chrome-moly steel frame |
| Front Suspension: | Telescopic hydraulic fork | White Power – Up Side Down 4357 MXMA fork |
| Rear Suspension: | Swinging arm fork with adjustable hydraulic shock absorbers | Central shock absorber (WP BAVP3612) with PRO-LEVER linkage to rear- swing-arm with needle bearing |
| Front Brakes: | 200mm Drum | Single 300 mm disc, 4 piston caliper |
| Rear Brakes: | 200mm Drum | Single 220 mm disc, 1 piston caliper |
| Front Tyre: | 2.75-18 | 90/90 - 21 |
| Rear Tyre: | 3.25-18 | 140/80 - 18 |
| Wheelbase: | 1300 mm / 51.1 in | 1510 mm / 59.4 in |
| Fuel Capacity: | 16 Litres / 4.2 US gal | 12 L / 3.2 US gal / 2.6 Imp gal |