BRP Cam-Am BRP Can Am Spyder RS-S Roadster (2012-13) vs Kawasaki Ninja 250R (2013-14)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | BRP Cam-Am | Kawasaki |
| Model: | BRP Can Am Spyder RS-S Roadster | Ninja 250R |
| Years: | 2012-13 | 2013-14 |
| Engine: | BRP-Rotax, Four stroke, V-Twin, DPHC, 4 valve per cylinder | Four stroke . parallel twin, DOHC, 4 valve per cylinder |
| Capacity: | 998 cc / 61 cu-in | 248 cc / 15.1 cu-in |
| Bore x Stroke: | 97 x 68 mm | 62 х 41.2mm |
| Cooling System: | Liquid cooled | Liquid cooled |
| Compression Ratio: | 10.8:1 | 11.6:1 |
| Induction: | Multi-point EFI with 57 mm diameter throttle bodies | Fuel injection, 2x 28 mm throttle bodies (US 2x Keihin CVK30 carburetors |
| Ignition: | Electronic ignition with dual output coil | TCBI with Digital Advance |
| Starting: | Electric | Electric |
| Max Power: | 106 hp / 79 kW @ 8500 rpm | 29.9 hp / 22 kW @ 10500 rpm |
| Max Torque: | 77 lb-ft / 104.3 Nm @ 6250 rpm | 21.7 Nm / 2.21 kgf-m / 16.0 lb-ft @ 10000 rpm |
| Clutch: | Wet, multi-plate, manual or electronic operation through a hydraulic piston | Wet, cable operated |
| Transmission: | Sequential Manual 5-Speed (SM5) with transmission-based reverse | 6 Speed |
| Final Drive: | Belt | O-ring chain |
| Front Suspension: | Double A-Arm with anti-roll bar, .5.67 in 144 mm front suspension travel. with adjustable cam | 37mm hydraulic telescopic fork |
| Rear Suspension: | Swing-arm with monoshock, 5.71 in 145 mm with adjustable cam rear suspension travel. | Uni-Trak® with aluminum linkage |
| Front Brakes: | 260mm discs 4 piston caliper | Single 260mm hydraulic petal disc 2 piston caliper |
| Rear Brakes: | Single 260mm disc 2 piston caliper | Single 220mm petal disc 2 piston caliper |
| Front Tyre: | 2x 165/65R14 | 110/70-17 |
| Rear Tyre: | 225/50R15 | 130/70-17 |
| Seat Height: | 737 mm / 29 in | 780 mm / 29.3 in |
| Dry Weight: | .316 kg / 697 lbs | 151 kg / 304 lbs. |
| Fuel Capacity: | 25 Litres / 6.6 US gal | 17 Litres / 4.4 US gal |