Harley-Davidson Harley Davidson Softail Low Rider S (2022) vs Moto Guzzi California 1100 EV Touring (2002-06) vs Kawasaki Ninja 250R (2011)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
Remove bike |
| Make: | Harley-Davidson | Moto Guzzi | Kawasaki |
| Model: | Harley Davidson Softail Low Rider S | California 1100 EV Touring | Ninja 250R |
| Years: | 2022 | 2002-06 | 2011 |
| Engine: | Four stroke, V-Twin, Milwaukee-Eight 117, Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters, 4 valves per cylinder | Four stroke, 90° V twin, longitudinally mounted, OHV, 2 valve per cylinder. | Four stroke . parallel twin, DOHC, 4 valve per cylinder |
| Capacity: | 1923 cc / 117 cu-in | 1064 cc / 64.9 cu-in | 248 cc / 15.1 cu-in |
| Bore x Stroke: | 103.5 x 114.3 mm | 92 x 80 mm | 62 х 41.2mm |
| Cooling System: | Air cooled | Air cooled | Liquid cooled |
| Compression Ratio: | 10.2:1 | 9.8:1 | 11.6:1 |
| Induction: | Electronic Sequential Port Fuel Injection (ESPFI) | Magneti Marelli IAW Multipoint phased sequential fuel injection | 2x Keihin CVK30 carburetors |
| Lubrication: | Pressurized, dry-sump with oil cooler | Forced lobes, with geared pump and pressure regulator | Wet sump |
| Ignition: | Single-fire, non-wasted, map-controlled spark ignition | Magneti Marelli IAW electronic digital ignition | TCBI with Digital Advance / electric |
| Starting: | Electric | Electric | Electric |
| Max Power: | 103 hp / 77 kW @ 4750 rpm | 74 hp / 53.9 kW @ 6400 rpm | 29.9 hp / 22 kW @ 10500 rpm |
| Max Torque: | 169 Nm / 125 lb-ft @ 3500 rpm | 95 Nm / 70.0 lb-ft @ 5000 rpm | 21.7 Nm / 2.21 kgf-m / 16.0 lb-ft @ 10000 rpm |
| Clutch: | Mechanical, 10 plate wet, assist & conventional | Single disc, dry, with mechanical control | Wet, cable operated |
| Transmission: | 6 Speed | 5 Speed | 6 Speed |
| Final Drive: | Belt, 32/66 ratio | Shaft | O-ring chain |
| Frame: | Mild steel, tubular frame; rectangular section backbone; stamped, cast, and forged junctions; MIG welded; aluminum forged fender supports | Detachable tubular duplex cradle in special high-strengh steel | Semi-double cradle, high-tensile steel, |
| Front Suspension: | Single cartridge 43 mm inverted with aluminum fork triple clamps; triple rate spring | 45mm Marzocchi hydraulic telescopic fork, adjustable separately | 37mm hydraulic telescopic fork |
| Front Wheel Travel: | 130 mm / 5.1 in | 130 mm / 5.1 in | 119 mm / 4.7 in |
| Rear Suspension: | Hidden, free piston, coil-over monoshock; 56 mm stroke; hydraulic preload adjustment | Swing arm with 2 hydraulic shock absorbers with preload adjustment | Uni-Trak® with aluminum linkage |
| Rear Wheel Travel: | 112 mm / 4.4 in | 89 mm / 3.5 in | 130 mm / 5.1 in |
| Front Brakes: | 2 x 300mm discs, 4 piston caliper | 2x 320mm discs 4 piston calipers | Single 260mm hydraulic petal disc 2 piston caliper |
| Rear Brakes: | Single 292mm disc, 2 piston floating caliper | Single 282mm disc 2 piston caliper | Single 220mm petal disc 2 piston caliper |
| Front Tyre: | 110/90B19,62H,BW | 110/90-18 | 110/70-17 |
| Rear Tyre: | 180/70B16,77H,BW | 140/80-17 | 130/70-17 |
| Dimensions: | Length 2365 mm / 93.1 in Width 870 mm / 34.3 in Height 1195 mm / 47 in | Length 2380 mm / 93.7 in Width 815 mm / 32.0 in Height 1150 mm / 45.2 in | Length 2080 mm / 80.0 in. Width 711 mm / 28.0 in. Height 1115 mm / 43.1 in. |
| Wheelbase: | 1615 mm / 63.6 in | 1560 mm / 61.4 in | 1389 mm / 5.1 in. |
| Seat Height: | Laden 686 mm / 27 in Unladen 710 mm / 28 in | 750 mm / 29.5 in | 780 mm / 29.3 in |
| Dry Weight: | 295 kg / 650 lbs | 251.0 kg / 553.3 lbs | 151 kg / 304 lbs. |
| Fuel Capacity: | 18.9 Litres / 5 US gal | 19 Litres / 5.0 US gal | 18.2 Litres / 5.8 US gal |