Junak M07R (1956-59) vs Beta RS 450 (2012)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | Junak | Beta |
| Model: | M07R | RS 450 |
| Years: | 1956-59 | 2012 |
| Engine: | Four stroke, single cylinder, OHV | Four stroke, single cylinder, 4 valve |
| Capacity: | 349 cc / 21.3 cub. in. | 449 cc / 27.4 cu in |
| Bore x Stroke: | 75 x 79 mm | 95 x 63.4 mm |
| Compression Ratio: | 7.0:1 | 11.95:1 |
| Lubrication: | Dry-sump | Twin oil pumps with cartridge oil filter. Separate oil for engine and clutch |
| Ignition: | Magneto | DC-CDI with variable ignition timing, Kokusan. |
| Starting: | Kick-start | Electric and kick |
| Clutch: | Multi-plate clutch with cork inserts working in an oil bath | Wet, multi-plate |
| Transmission: | Four-speed constant-mesh | 6 Speed |
| Final Drive: | Chain | O-ring chain, DID |
| Frame: | Double, cradle-type, welded throughout of tubing, provided with holders for side car mounting. | Molybdenum steel with double cradle split above exhaust port. Air filter access from the side |
| Front Suspension: | Telescopic fork with coil springs and oil damping | Sachs USD fork, Ø 48 mm, adjustable compression and rebound, TFX technology |
| Rear Suspension: | Swinging arm sprung on telescopic elements with coil springs and oil damping. | Sachs shock w/adjustable rebound and hi/low speed compression, |
| Front Brakes: | Full hub width, of expander shoe type, hand operated | Single Ø 260 mm disc, 2 piston caliper |
| Rear Brakes: | Full hub width, of expander shoe type, foot operated | Single Ø 240 mm disc, 1 piston caliper |
| Front Tyre: | 19 in | 90/90 - 21 |
| Rear Tyre: | 19 in | 140/80 - 18 |
| Seat Height: | 755 mm / 29.7 in | 934.7 mm / 36.8 in |
| Ground Clearance: | 170 mm / 6.7 in | 320 mm / 12.6 in |
| Dry Weight: | 170 kg / 374.8 lbs | 108 kg / 240 lbs |
| Fuel Capacity: | 17 l / 3.9 US gal | 7.9 L / 2.1 gal |