BMW R 60/5 (1969-73) vs Beta RR 525 Enduro (2009-10)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | BMW | Beta |
| Model: | R 60/5 | RR 525 Enduro |
| Years: | 1969-73 | 2009-10 |
| Engine: | Four stroke, two cylinder horizontally opposed Boxer, pushrod operated 2 valves per cylinder. | Four stroke, single cylinder, 4 valve |
| Capacity: | 599 cc / 36.6 cu in. | 510 cc / 31.1 cu in |
| Bore x Stroke: | 73.5 x 70.6 mm | 95 x 72 mm |
| Compression Ratio: | 9.2:1 | 11.0:1 |
| Cooling System: | Air cooled | Liquid cooled |
| Induction: | 2 x Bing slide carburetors | Keihin FCR-MX 39 |
| Ignition: | Battery ignition | DC-CDI without trembler with variable ignition timing, Kokusan type |
| Starting: | Kick | Electric and kick |
| Clutch: | Dry single plate, with diaphragm spring | Wet, multi-disc |
| Transmission: | 4 Speed | 6 Speed |
| Final Drive: | Shaft | Chain |
| Frame: | Double loop tubular frame with bolt on rear section | Molybdenum steel with double cradle split above the exhaust port |
| Front Suspension: | Telescopic hydraulic forks | Hydraulic USD fork, Ø45 mm |
| Front Wheel Travel: | 208 mm / 8.2" | 290 mm / 11.4 in |
| Rear Suspension: | Long swinging arm with strut | Monoshock with progressive compound lever, 300mm wheel travel |
| Rear Wheel Travel: | 125 mm / 4.9" | 300 mm / 11.8 in |
| Front Brakes: | ∅200mm Drum | Single Ø255 mm floating disc, 2 piston floating caliper |
| Rear Brakes: | ∅200mm Drum | Single Ø240 mm disc, 1 piston floating caliper |
| Front Tyre: | 3.25 - S19 | 90/90 - 21 |
| Rear Tyre: | 4.00 - S18 | 140/80 -18 |
| Fuel Capacity: | 24 liters / 6.3 US gal | 8.5 L / 2.2 US gal |