Honda NC 750D Integra (2014-16) vs Honda XR 200R (1988)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | Honda | Honda |
| Model: | NC 750D Integra | XR 200R |
| Years: | 2014-16 | 1988 |
| Engine: | Four stroke , Parallel twin, SOHC, 4 valves per cylinder | Four stroke, single cylinder SOHC, 2 valve, chain driven overhead camshaft |
| Capacity: | 745 cc / 45.4 cu-in | 195 cc / 11.8 cu-in |
| Bore x Stroke: | 77 x 80mm | 67 x 56.5 mm |
| Compression Ratio: | 10.7:1 | 10.2:1 |
| Induction: | PGM-FI electronic fuel injection | 2x 20 mm piston valve Keihin carburator |
| Ignition: | Computer-controlled digital transistorised with electronic advance | Solid state CD |
| Starting: | Electric | Kick |
| Max Power: | 40.3 kW / 54 hp @ 6250 rpm | 23 hp / 17.1 Kw @ 9000 rpm |
| Max Torque: | 68 Nm / 50.8 lb-ft@ 4750 rpm | 19.5 Nm / 14.4 lb-ft @ 7500 rpm |
| Clutch: | Wet Multiplate | Wet multiplate type |
| Transmission: | 6 Speed Manual | 6 Speed |
| Final Drive: | Chain | Chain |
| Frame: | Rigid tube steel diamond | Semi double cradle |
| Front Suspension: | 41 mm telescopic forks | 36 mm Air-adjustable forks with dual Syntallic bushings |
| Front Wheel Travel: | 120 mm / 4.7 in | 254 mm / 10.0 in |
| Rear Suspension: | Single monoshock damper | Pro-Link, single Showa shock, adjustable |
| Rear Wheel Travel: | 120 mm / 4.7 in | 246 mm / 9.7 in |
| Front Brakes: | Single 320 mm hydraulic disc 3 piston calipers and sintered metal pads | Drum, swept area - 86.3 cm2 / 13.3 sq. in. |
| Rear Brakes: | Single 240 mm hydraulic disc 1 piston caliper and sintered metal pads | Drum, swept area - 86.3 cm2 / 13.3 sq. in |
| Front Tyre: | 120/70ZR17M/C (58W) | 3.00/21(6PR) |
| Rear Tyre: | 160/60ZR17M/C (69W) | 110/90/17(6PR) |
| Rake: | 27˚ | 26° |
| Trail: | 110 mm / 4.3 in | 105 mm / 4.1 in |
| Wheelbase: | 1525 mm / 60.0 in | 1365 mm / 53.7 in |
| Seat Height: | 790 mm (Europe) - 775 mm (Japan) | 905 mm / 35.6 in |
| Fuel Capacity: | 14.1 Litres / 3.7 US gal | 9.0 Litres / 2.4 gal |