Honda CM 400T (1981-82) vs Honda CM 250T (1981) vs Honda VT 250F Integra (1985)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
Remove bike |
| Make: | Honda | Honda | Honda |
| Model: | CM 400T | CM 250T | VT 250F Integra |
| Years: | 1981-82 | 1981 | 1985 |
| Engine: | Four stroke, parallel twin, OHC, 3 valve per cylinder | Four stroke, parallel twin, OHC, 2 valve per cylinder | Four stroke, V-Twin, DOHC, 4 valves per cylinder |
| Capacity: | 395 cc / 24.1 cu-in | 234 | 248 cc / 15.2 cu-in |
| Bore x Stroke: | 70.5 x 50.6 mm | 53.0 x 53.0 mm | 60 x 44.1 mm |
| Cooling System: | Air cooled | Air cooled | Liquid cooled |
| Compression Ratio: | 9.3:1 | 9.4:1 | 11.0:1 |
| Induction: | 2x 32mm Keihin carb. | 2x 32mm Keihin carburetors | |
| Ignition: | Capacitor discharge electronic ignition | Transistorized | |
| Max Power: | 17 hp @ 7500 rpm | 35 hp / 25.5 kW @ 11000 rpm | |
| Max Torque: | 21.5 Nm / 15.9 lb-ft @ 10000 rpm | ||
| Transmission: | 5 Speed | 4 Speed | 6 Speed |
| Final Drive: | Chain | Chain | Chain 520 O-ring |
| Front Suspension: | Telehydraulic forks | 31mm Forks, centre axle fork | Air assisted telescopic forks with anti-dive adjustment |
| Rear Suspension: | Swingarm fork with adjustable telehydraulic shocks | Dual shocks adjustable spring preload | Pro-link air assisted monoshock |
| Front Brakes: | Single disc | Single disc | Single disk, 2-piston calliper |
| Rear Brakes: | Drum | Drum | Drum |
| Front Tyre: | 3.50-18 | 3.25-18 | 100/90-16 54S |
| Rear Tyre: | 4.60-16 | 110/90-16 | 120/80-17 61S |
| Fuel Capacity: | 9.5 Litres / 2.5 US gal | 12.5 Litres | 14 Litres / 3.7 US gal |