Honda VF 1000R (1986) vs Honda VFR 400R NC30 (1991)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | Honda | Honda |
| Model: | VF 1000R | VFR 400R NC30 |
| Years: | 1986 | 1991 |
| Engine: | Four stroke, 90°V-four cylinder, DOHC, 4 valve per cylinder | Four stroke 90°V-four cylinder, DOHC, 4 valves per cylinder |
| Capacity: | 998 cc / 60.9 cu-in | 399 cc / 15.7 cu-in |
| Bore x Stroke: | 77 x 53.6 mm | 55 x 42 mm |
| Cooling System: | Liquid cooled | Liquid cooled |
| Compression Ratio: | 10.7:1 | 11.3:1 |
| Induction: | 4x 34mm CV type carbs | 4x 34mm Keihin carburetors |
| Ignition: | Inductive magnetically triggered | Digitalized full transistor ignition |
| Starting: | Electric | Electric |
| Max Power: | 130 hp / 94.8 kW @ 10500 rpm | 59.hp / 43.1 kW @ 12800 rpm |
| Max Torque: | 92.2 Nm / 8.8 kg-m / 63.7 ft-lb @ 8000 RPM | 39 Nm / 4.0 kgf-m / 28.8 lb-ft @ 10000 rpm |
| Transmission: | 5 Speed | 6 Speed |
| Final Drive: | Chain | Chain |
| Front Suspension: | 41mm center-axle with air-assist, 3-way rebound damping, anti-dive valuing | 41mm inverted forks: preload and rebound damping |
| Rear Suspension: | Air-assist coil-over shock, progressive linkage, three-way rebound damping | Rising-rate monoshock: pre-load and rebound damping |
| Front Brakes: | 2x 285mm discs 4 piston calipers | 2x 269mm 4 piston calipers |
| Rear Brakes: | Single 285mm disc 1 piston caliper | Single disc 2 piston caliper |
| Front Tyre: | 120/80 V16 | 100/90 R16 |
| Rear Tyre: | 140/80 V17 | 140/60 R18 |
| Seat Height: | 810 mm / 31.8 in | 870 mm / 30.7 in |
| Dry Weight: | 236 kg / 520 lbs | 165 kg / 363.8 lbs |
| Fuel Capacity: | 23 liters (4.5L) | 18 Litres / 4.0 gal |
| Consumption Average: | 36 mpg | 42 mpg |
| Standing ¼ Mile: | 10.8 sec / 124.4 mp/h | 12.6 sec / 175 km/h / 109 mph |
| Top Speed: | 149.0 mph | 219 km/h / 136 mph |