BMW R 24 (1948-50) vs Husaberg FE 570 Enduro (2010-11) vs Honda VFR 400R NC30 (1990)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
Remove bike |
| Make: | BMW | Husaberg | Honda |
| Model: | R 24 | FE 570 Enduro | VFR 400R NC30 |
| Years: | 1948-50 | 2010-11 | 1990 |
| Engine: | Four stroke, single cylinder, pushrod operated, OHV, 2 valves per cylinder. | Four stroke, single-cylinder, SOHC, 4 valves | Four stroke 90°V-four cylinder, DOHC, 4 valves per cylinder |
| Capacity: | 247 cc / 15.1 cu in. | 565.5 cc / 34.5 cu-in | 399 cc / 15.7 cu-in |
| Bore x Stroke: | 68 x 68 mm | 100 x 72 mm | 55 x 42 mm |
| Compression Ratio: | 6.75:1 | 12.2:1 | 11.3:1 |
| Cooling System: | Air cooled | Liquid cooled | Liquid cooled |
| Induction: | 1x Bing type AJ 1/22/140 | Keihin EFI Electronic fuel injection. | 4x 34mm Keihin carburetors |
| Ignition: | Battery ignition | Kokusan digital | Digitalized full transistor ignition |
| Starting: | Kick | Electric | Electric |
| Clutch: | Single plate, dry | Wet multi-disc clutch, hydraulically operated | Wet, cable operated |
| Max Power: | 8.9 kW / 12 hp @ 5600 rpm | NA | 59.hp / 43.1 kW @ 12800 rpm |
| Transmission: | 4 Speed | 6 Speed | 6 Speed |
| Final Drive: | Shaft | Chain | Chain |
| Frame: | Closed steel twin loop frame, welded | Double cradle perimeter design 25CrMo4, subframe Cross-linked Polyethylene | Twin-spar aluminum |
| Front Suspension: | Telescopic fork | WP USD 4860 MA Husaberg Enduro | 41mm inverted forks: preload and rebound damping |
| Rear Suspension: | Rigid, spring loaded saddle | WP PDS 5018 Husaberg Enduro | Rising-rate monoshock: pre-load and rebound damping |
| Rear Brakes: | ∅160mm Drum | Single 220mm disc 1 piston caliper | Single disc 2 piston caliper |
| Front Tyre: | 3.00 x 19" | 90/90 -21 | 100/90 R16 |
| Rear Tyre: | 3.00 x 19" | 140/80-18 | 140/60 R18 |
| Fuel Capacity: | 12 L / 3.1 US gal | 9 Litres / 2.4 US gal | 18 Litres / 4.0 gal |