Honda CB 1000 Custom (1983) vs Honda VFR 400R NC24 (1988)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | Honda | Honda |
| Model: | CB 1000 Custom | VFR 400R NC24 |
| Years: | 1983 | 1988 |
| Engine: | Four stroke, transverse four cylinder, DOHC, 2 valve per cylinder | Four stroke 90°V-four cylinder, DOHC, 4 valves per cylinder |
| Capacity: | 973 cc / 61 cu-in | 399 cc / 15.7 cu-in |
| Bore x Stroke: | 67 x 69mm | 55 x 42 mm |
| Cooling System: | Air cooled | Liquid cooled |
| Compression Ratio: | 9.0:1 | 11.3:1 |
| Induction: | 4x 32mm Keihin CV carburetors | 4x 34mm Keihin CV carburetors |
| Ignition: | Transistorized, 2 magnetic triggers | Digitalized full transistor ignition |
| Starting: | Electric | Electric |
| Max Power: | 89 hp @ 8000 rpm | 59 hp / 43.1 kW @ 12800 rpm |
| Max Torque: | 60.7 lb-ft @ 6500 rpm | 39 Nm / 4.0 kgf-m / 28.8 lb-ft @ 10000 rpm |
| Transmission: | 5 Speed | 6 Speed |
| Final Drive: | Shaft | Chain |
| Front Suspension: | air/coil spring telescopic fork 160mm wheel travel. | 41mm inverted forks: preload and rebound damping |
| Rear Suspension: | swing arm, twin air/coil spring shocks, 99mm wheel travel | Rising-rate monoshock: pre-load and rebound damping |
| Front Brakes: | 2x 274mm discs | 2x 269mm 4 piston calipers |
| Rear Brakes: | Single 296mm disc | Single disc 2 piston caliper |
| Front Tyre: | 110/90-18 | 100/90 R16 |
| Rear Tyre: | 140/90-16 | 140/60 R18 |
| Seat Height: | 810 mm / 31.3 in | 870 mm / 30.7 in |
| Fuel Capacity: | 16.7 Litres / 4.4 US gal | 18 Litres / 4.0 gal |
| Consumption average: | 47 mpg | 42 mpg |
| Standing ¼ Mile: | 12.27 sec / 107.3 mph | 12.6 sec / 175 km/h / 109 mph |
| Top Speed: | 196 km/h / 122 mph | 219 km/h / 136 mph |