Moto-Data

CR&S CR&S Duu Sbirluscenta () vs Horex VR6 Black Edition (2016) vs Honda NC 750X / DCT (2018-19)

Comparison technical specifications


Add bike
0 CR&S CR&S Duu Sbirluscenta
Remove bike
2016 Horex VR6 Black Edition
Remove bike
2018 Honda NC 750X / DCT
Remove bike
Make: CR&S Horex Honda
Model: CR&S Duu Sbirluscenta VR6 Black Edition NC 750X / DCT
Years: 2016 2018-19
Engine: S & S X-Wedge, four stoke, 56 ° V-Twin, 2 Valves per cylinder Four stroke, V6, 15 degree V-angle mirrored cylinder offset, triple overhead cam, 3 valves per cylinder Four stroke , Parallel twin, SOHC, 4 valves per cylinder
Capacity: 1917 cc / 117 cu-in 1218 cc / 74.32 cu-in 745 cc / 45.4 cu-in
Bore x Stroke: 1104.8 x 111.1 mm 68.2 x 55.4 mm 77 x 80mm
Cooling System: Air cooled Liquid cooled Liquid-cooled
Compression Ratio: 9.75:1 12.5:1 10.7:1
Induction: Injection, single injector per cylinder, 55 mm throttle body Turbo. Rotrex radial compressor C-series, detatchable PGM-FI electronic fuel injection
Starting: Electric Electric Electric
Clutch: Wet multiplate with hydraulic control Multi-disc oil bath clutch, operated hydraulically. 1:2.47 ratio.fuel capacity: 4.00 litres (1.06 gallons) Wet Multiplate
Transmission: 5 or 6 Speed (6-speed option) 6 Speed 6 Speed Manual
Final Drive: Chain with "O" ring Chain Chain
Frame: Main frame tube relevant section stainless steel cradle and slide motor boxed stainless steel frame and box-seat carrier light alloy. Collagamento plates are made of light alloy Aluminum bridge frame with steel steering head Rigid tube steel diamond
Front Suspension: 48 mm Upside down fork adjustable rebound and preload Öhlins upside-down fork (Ø 43 mm) with adjustable spring preload, compression and rebound damping 41 mm telescopic forks
Front Wheel Travel: 120 mm / 4.7 in 120 mm / 4.7 in 137 mm / 5.4 in
Rear Suspension: Swingarm with monoshock teleidraulico, progressive, adjustable rebound and preload. Öhlins TTX36 GP suspension struts with adjustable spring base, rebound and compression damping and built-in hydraulic spring preload adjustment Single monoshock damper
Rear Wheel Travel: 128 mm / 5.0 in 120 mm / 4.7 in 150 mm / 5.9 in
Front Brakes: 2x 320mm floating disc, 2 piston calipers 2x 320mm disc. ABS. Radial 4-piston calipers. Bremo. Single 320 mm hydraulic disc 2 piston calipers and sintered metal pads
Rear Brakes: Single 260mm disc, 2 piston caliper Single 264mm disc. ABS. 2-piston caliper. Bremo Single 240 mm hydraulic disc 1 piston caliper and sintered metal pads
Front Tyre: 120/70 ZR17 120/70-ZR17 120/70-ZR17
Rear Tyre: 190/55-ZR17 190/55-ZR17 160/60-ZR17