Victory Vision Tour Comfort (2008) vs Honda NC 700S / DCT (2012-13)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | Victory | Honda |
| Model: | Vision Tour Comfort | NC 700S / DCT |
| Years: | 2008 | 2012-13 |
| Engine: | Four stroke, 50° V twin SOHC, 4 valves per cylinder, self-adjusting cam chains, hydraulic lifters | Four stroke , Parallel twin, SOHC, 4 valves per cylinder |
| Capacity: | 1731cc /106 cu-in | 670 cc / 40.8 cu-in |
| Bore x Stroke: | 101 x 108 mm | 73 × 80 mm |
| Cooling System: | Air/oil cooled | Liquid-cooled |
| Compression Ratio: | 9.8:1 | 10.7:1 |
| Induction: | Electronic Fuel Injection with 45mm throttle bodies | PGM-FI electronic fuel injection |
| Starting: | -Electric | Electric |
| Max Power: | 96.9 hp / 71.3 kW | 38.1 kW 51.1 hp @ 6250 rpm |
| Max Torque: | 153 Nm / 15.6 kg-m | 62 Nm / 46 lb-ft @ 4750 rpm |
| Clutch: | Wet, multi-plate | Wet Multiplate |
| Transmission: | 6 Speed | 6 Speed Manual |
| Final Drive: | Carbon fiber reinforced belt | Chain |
| Front Suspension: | 43mm Inverted cartridge telescopic fork | 41 mm telescopic forks |
| Front Wheel Travel: | 130 mm / 5.1 in | 120 mm / 4.7 in |
| Rear Suspension: | Single, mono-tube gas forged and cast aluminum w/ rising-rate linkage | Single monoshock damper |
| Rear Wheel Travel: | 120 mm / 4.7 in | 120 mm / 4.7 in |
| Front Brakes: | 2x 300mm floating rotor 3 piston caliper | Single 320 mm hydraulic disc 3 piston calipers and sintered metal pads |
| Rear Brakes: | Single 300mm floating rotor 2 piston caliper | Single 240 mm hydraulic disc 1 piston caliper and sintered metal pads |
| Front Tyre: | 130/70 R18 | 120/70-ZR17 |
| Rear Tyre: | 180/60 R16 | 160/60-ZR17 |
| Seat Height: | 673 mm / 26.5 in | 790 mm / 31.1 in (Europe) - 775 mm / 30.5 in (Japan) |
| Fuel Capacity: | 22.7 Litres / 6 US gal | 14.1 Litres / 3.7 US gal |