Honda CR 500R (1983) vs BMW G 650GS (2009) vs BMW R 6 (1937) vs BMW K1600B Bagger (2017-18) vs BMW R 60 (1956-60) vs BMW R 26 (1956-60) vs Beta RR 400 Motard (2011-12) vs AJP PR3 125 Trail, Enduro (Pro), Supermoto (2009-14)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
Remove bike |
Remove bike |
Remove bike |
Remove bike |
Remove bike |
Remove bike |
| Make: | Honda | BMW | BMW | BMW | BMW | BMW | Beta | AJP |
| Model: | CR 500R | G 650GS | R 6 | K1600B Bagger | R 60 | R 26 | RR 400 Motard | PR3 125 Trail, Enduro (Pro), Supermoto |
| Years: | 1983 | 2009 | 1937 | 2017-18 | 1956-60 | 1956-60 | 2011-12 | 2009-14 |
| Engine: | Two stroke, single cylinder, membrane & power valve | Four stroke, single cylinder, DOHC, 4 valves per cylinder | Four stroke, two cylinder flat twin, side valve | Four stroke, transverse six cylinder, 4 valves per cylinder | Four stroke, two cylinder horizontally opposed Boxer, pushrod operated 2 valves per cylinder. | Four stroke, single cylinder, pushrod operated, OHV, 2 valves per cylinder. | Four stroke, single cylinder, OHC, 4 valves | Single cylinder, 4-stroke, 2-valve |
| Capacity: | 491.4 cc / 29.9 cu-in | 652 cc / 39.8 cub. in. | 600 cc / 36.6 cu in | 1649 cc / 100.6 cu in. | 594 cc / 36.2 cu in. | 247 cc / 15.1 cu in. | 398 cc / 24.3 cu in | 124 cc / 7.6 cub in |
| Bore x Stroke: | 89.0 x 79.0 mm | 100 x 83 mm | 70 x 78 mm | 72 x 67.5 mm | 72 x 73 mm | 68 x 68 mm | 89 x 64 mm | 56.5 x 49.5 mm |
| Induction: | Single 38mm Keihin flat-slide carburettor | Fuel induction | 2 x Carburetors, type Amal M 75/426/S | 52mm Throttle valve diameter, BMS-X | 2 x Type Bing 1/24/151 - 1/24/152 | 1x Bing carburetor type 1/26/46 | Keihin FCR-MX 39 | Walbro 30 mm carburetor |
| Starting: | Kick | Electric | Kick | Electric | Kick | Kick | Electric and kick | Electric + kick |
| Max Power: | 59 hp / 44 kW @ 6600 rpm | 37 kW / 48 hp @ 6500 rpm | 13.4 kW / 18 hp @ 4500 rpm | 118 kW / 160.5 hp @ 7750 rpm | 20.9 kW / 28 hp @ 5600 rpm | 11.2 kW / 15 hp @ 6400 rpm | 8.4 kW / 11.4 hp @ 3500 rpm | 9.3 kW / 12.5 hp @ 8500 rpm |
| Transmission: | 5 Speed | 5 Speed | 4 Speed | Constant-mesh 6-speed gearbox, helical cut | 4 Speed | 4 Speed | 6 Speed | 5 Speed |
| Final Drive: | Chain | Chain | Shaft | Shaft | Shaft | Shaft | Chain, X-ring | Chain |
| Front Suspension: | 46mm Showa telescopic fork | ∅41mm telescopic fork with stabilizer bridge | Telescopic fork | Dual longitudinal control arm, Dynamic ESA semi-active suspension (road and dynamic modes) | Telescopic hydraulic forks | Telescopic fork | Marzocchi hydraulic USD fork, Ø 45 mm | Marzocchi USD 38 mm, multi-adjustable |
| Rear Suspension: | Showa Prolink with adjustable compression/rebound dampening | Spring setting and rebound stage damping continuously adjustable. | Rigid, spring loaded saddle | Paralever (single-sided swing arm), central spring strut, rebound/continuously variable, Dynamic ESA semi-active suspension (road and dynamic modes) | Long swinging arm with strut. 125mm wheel travel | Long swing arm with suspension units and oil pressure dampers | Sachs mono shock, preload, compression and rebound damping adjustable | ZF Sachs – Progressive System with reservoir, multi adjustable |
| Rear Brakes: | Drum | Single ∅240mm disc, 1 piston caliper | ∅200mm Drum | Single 320mm disc, 2 piston caliper | ∅200mm Drum | ∅160mm Drum | Single Ø 240 mm disc, 1 piston caliper | Disc, 220 mm, single piston caliper |
| Front Tyre: | 3.00-21 | 100/90-19 | 3.00 x 19" | 120/70 ZR17 | 3.50 - S18 | 3.25 x 18" | 120/70 -17 | Trail: 2.75 - 19 Enduro (Pro): 70/100-19 Supermoto: 100/80-17 |
| Rear Tyre: | 5.10-18 | 130/80-17 | 3.50 x 19" | 190/55 ZR17 | 3.50 - S18 | 3.25 x 18" | 150/60 -17 | Trail: 3.25 - 17 Enduro (Pro): 100/100-17 Supermoto: 130/70-17 |
| Fuel Capacity: | 9 Litres / 2.38 US gal | 17.3 Litres / 4.6 US gal. | 15 L / 4.0 US gal | 26.5 Litres / 7.0 US gal | 17 liters / 4.49 US gal | 15 liters / US 3.9 gal | 8.5 L / 2.2 US gal | 7 L / 1.8 US gal |