Moto-Data

Honda CM 250T (1986) vs Honda CBR 600F3 (1995) vs Honda CX 400 Custom (1983-)

Comparison technical specifications


Add bike
1986 Honda CM 250T
Remove bike
1995 Honda CBR 600F3
Remove bike
1983 Honda CX 400 Custom
Remove bike
Make: Honda Honda Honda
Model: CM 250T CBR 600F3 CX 400 Custom
Years: 1986 1995 1983-
Engine: Four stroke, parallel twin, OHC, 2 valve per cylinder Four stroke, transverse four cylinder 30° forward of vertical, DOHC, 4 valve per cylinder. Four stroke, longitudinal 800 V-twin cylinder, camshaft nestles at the base of the V between the cylinders. ,OHV, 4 valves per cylinder operated by pushrods
Capacity: 234 598 / 36.55 cu in 396 cc / 24.1 cu-in
Cooling System: Air cooled Liquid cooled Liquid cooled
Bore x Stroke: 53.0 x 53.0 mm 65 x 45.2 mm
Induction: 4x 36mm / 1.4 in Mikuni BDST constant velocity (CV) carburetors 2x 34mm Keihin carburetors
Ignition: Transistorized electronic with 3D mapping CDI
Max Power: 17 hp @ 7500 rpm 100 hp / 74.6 kW @ 12000 rpm 40 hp / 29.8 kW @ 9500 rpm
Max Torque: 63.7 Nm / 47 ft/lf @ 10500 rpm 32Nm / 23.6 lb-ft @ 7500 rpm
Transmission: 4 Speed Close-ratio 6 speed 5 Speed
Final Drive: Chain Chain, #525 O-ring-sealed; 108 links Shaft
Front Suspension: 31mm Forks, centre axle fork 41 mm HMAS cartridge fork with spring preload and rebound damping adjustability; 39mm Showa telehydraulic fork
Rear Suspension: Dual shocks adjustable spring preload Rectangular swingarm. Unit Pro-Link HMAS rising rate monoshock, preload, compression and rebound adjustable. Dual chocks
Front Brakes: Single disc 2x 296mm discs 2 piston calipers Single 275 mm discs 2 piston caliper
Rear Brakes: Drum Single 218mm disc 1 piston caliper 160mm Drum
Front Tyre: 3.25-18 120/60 ZR17 radial; 36psi (2.50 kg/cm^2) 3.25-19
Rear Tyre: 110/90-16 160/60 ZR17 radial; 42 psi (2.90 kg/cm^2) 3.75-16
Wet-Weight: 140 kg 206 kg / 454 lbs 200 kg / 441 lbs
Fuel Capacity: 12.5 Litres 17 Litres / 4.5 gal 11 Litres / 2.9 US gal