Suzuki TS 250 (1981) vs Aprilia Scarabeo 100 (2013) vs Honda CL 360 (1974-76)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
Remove bike |
| Make: | Suzuki | Aprilia | Honda |
| Model: | TS 250 | Scarabeo 100 | CL 360 |
| Years: | 1981 | 2013 | 1974-76 |
| Engine: | Two stroke, single cylinder, reed valve | Horisontal, single cylinder, four stroke, OHC | Four stroke, Vertical parallel twin aluminum alloy, OHC, 2 valve per cylinder |
| Capacity: | 246 cc / 15.0 cu in | 96.2 cc / 5.9 cu in | 357 cc / 21.7 cu-in |
| Bore x Stroke: | 72 x 64 mm | 50 x 49 mm | 67.0 x 50.6 mm |
| Compression Ratio: | 6.5:1 | 10.5:1 | 9.3:1 |
| Cooling System: | Air cooled | Forced air cooled | Air cooled |
| Induction: | Mikuni VM29SS carburetor, slide type | Dell'Orto carburetor, Ø22 mm | Carburettor |
| Ignition: | Suzuki PEI | Electronic | Contact breaker |
| Starting: | Kick | Electric and kick | Electric & kick |
| Clutch: | Wet, multi-plate | Automatic, centrifugal | Wet 8 plate 140 mm |
| Transmission: | 5 Speed, constant mesh | Air cooled automatic variator | 6 Speed |
| Final Drive: | Chain | V-belt | Chain |
| Frame: | Double cradle, tubular steel | Single spar with double cradle, high strength steel | Pressed/tubular semi-double cradle |
| Front Suspension: | Telescopic fork, leading axle oil damped | Hydraulic fork | Oil damped telescopic fork |
| Rear Suspension: | Swingarm, dual shocks, coil springs, 5-way adjustable | Hydraulic monoshock | Pressurized gas damped swing arm |
| Front Brakes: | Drum, internal expanding, leading shoe | Single stainless steel disc, Ø220 mm, two opposed piston caliper, 30 mm | 180mm Drum, Two leading shoe |
| Rear Brakes: | Drum, internal expanding, leading shoe | Drum, Ø140 mm, single leading shoe | 160mm Drum, Single cam |
| Wheelbase: | 1401 mm / 55.1 in | 1256 mm / 49.4 in | 1300 mm / 53 in |
| Seat Height: | 825 mm / 32.5 in | 780 mm / 30.7 in | 810 mm / 31.9 in |
| Fuel Capacity: | 10 L / 2.6 US gal / 2.2 Imp gal | 8 L / 2.1 US gal | 11 Litres / 2.9 US gal |