Honda CR 500 (1986) vs Magni Australia (1994) vs Honda CB 360G (1973-77) vs Honda CBX 650SC Night hawk (1982-85)

Comparison technical specifications

Add bike	Remove bike	Remove bike	Remove bike	Remove bike
Make:	Honda	Magni	Honda	Honda
Model:	CR 500	Australia	CB 360G	CBX 650SC Night hawk
Years:	1986	1994	1973-77	1982-85
Engine:	Two stroke, single cylinder, membrane & power valve	Four stroke, 90°transverse V-twin, OHC, 4 valves per cylinder	Four stroke, parallel twin cylinder, SOHC, 2 valve per cylinder	Four stroke, transverse four cylinders, DOHC, 4 valve per cylinder.
Capacity:	491.4 cc / 29.9 cu-in	992 cc / 60.5 cu-in	357 cc / 21.7 cu-in	656 cc / 40. cu-in
Bore x Stroke:	89.0 x 79.0 mm	90 x 78 mm	67.0 x 50.6 mm	60 x 58 mm
Compression Ratio:	6.8:1	10.0:1	9.3:1	9.5:1
Cooling System:	Liquid cooled	Air cooled	Air cooled	Air cooled
Induction:	Single 38mm Keihin flat-slide carburettor	Weber-Marelli EFI	2x carburetors	4x 26mm Keihin
Max Power:	64.6 hp / 47.5 kW @ 6000 rpm	75 kW / 102 hp @ 8400 rpm	34 hp / 24.8 kW @ 9000 rpm	75 hp / 54.7 kW @ 9500 rpm
Max Torque:	72.2 Nm / 53.3 lb-ft @ 6000 rpm	88 Nm / 65 lb-ft @ 6600 rpm
Front Suspension:	46mm Showacartridge fork	FI Upside-down fully adjustable	Telescopic forks	Showa air-spring, 39mm stanchion tube diameter, brake-actuated hydraulic anti-dive
Rear Suspension:	Showa Prolink with adjustable compression/rebound dampening	WP Parallelogrammo	Swingarm	Dual shocks, 5-way adjustable spring preload, 4-way adjustable rebound damping
Front Brakes:	Single disc hydraulic 2 piston caliper	2x 320mm disc	Single disc	2x 276 mm discs
Rear Brakes:	Drum	Single 230mm disc	Drum	Drum
Front Tyre:	3.00-21	120/70-VR17	3.00-18	100/90-19
Rear Tyre:	5.10-18	180/55-VR17	3.50-18	130/90-16
Fuel Capacity:	9 Litres / 2.38 US gal	23 Litres / 6.0 US gal	11 Litres / 2.9 US gal	12.9 Liters / 3.4 US gal