Honda CM 250T (1986) vs Honda CBR 600F3 (1995)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | Honda | Honda |
| Model: | CM 250T | CBR 600F3 |
| Years: | 1986 | 1995 |
| Engine: | Four stroke, parallel twin, OHC, 2 valve per cylinder | Four stroke, transverse four cylinder 30° forward of vertical, DOHC, 4 valve per cylinder. |
| Capacity: | 234 | 598 / 36.55 cu in |
| Cooling System: | Air cooled | Liquid cooled |
| Bore x Stroke: | 53.0 x 53.0 mm | 65 x 45.2 mm |
| Compression Ratio: | 9.4:1 | 12.0:1 |
| Induction: | 4x 36mm / 1.4 in Mikuni BDST constant velocity (CV) carburetors | |
| Ignition: | Transistorized electronic with 3D mapping | |
| Max Power: | 17 hp @ 7500 rpm | 100 hp / 74.6 kW @ 12000 rpm |
| Max Torque: | 63.7 Nm / 47 ft/lf @ 10500 rpm | |
| Transmission: | 4 Speed | Close-ratio 6 speed |
| Final Drive: | Chain | Chain, #525 O-ring-sealed; 108 links |
| Front Suspension: | 31mm Forks, centre axle fork | 41 mm HMAS cartridge fork with spring preload and rebound damping adjustability; |
| Rear Suspension: | Dual shocks adjustable spring preload | Rectangular swingarm. Unit Pro-Link HMAS rising rate monoshock, preload, compression and rebound adjustable. |
| Front Brakes: | Single disc | 2x 296mm discs 2 piston calipers |
| Rear Brakes: | Drum | Single 218mm disc 1 piston caliper |
| Front Tyre: | 3.25-18 | 120/60 ZR17 radial; 36psi (2.50 kg/cm^2) |
| Rear Tyre: | 110/90-16 | 160/60 ZR17 radial; 42 psi (2.90 kg/cm^2) |
| Wet-Weight: | 140 kg | 206 kg / 454 lbs |
| Fuel Capacity: | 12.5 Litres | 17 Litres / 4.5 gal |