Moto-Data

Honda CM 400T (1981-82) vs Honda CM 250T (1981) vs Honda VT 250F Integra (1985) vs Honda CB 1100R BB (1981)

Comparison technical specifications


Add bike
1981 Honda CM 400T
Remove bike
1981 Honda CM 250T
Remove bike
1985 Honda VT 250F Integra
Remove bike
1981 Honda CB 1100R BB
Remove bike
Make: Honda Honda Honda Honda
Model: CM 400T CM 250T VT 250F Integra CB 1100R BB
Years: 1981-82 1981 1985 1981
Engine: Four stroke, parallel twin, OHC, 3 valve per cylinder Four stroke, parallel twin, OHC, 2 valve per cylinder Four stroke, V-Twin, DOHC, 4 valves per cylinder Four stroke, transverse four cylinders, DOHC, 4 valve per cylinder
Capacity: 395 cc / 24.1 cu-in 234 248 cc / 15.2 cu-in 1062
Bore x Stroke: 70.5 x 50.6 mm 53.0 x 53.0 mm 60 x 44.1 mm 70 x 69 mm
Cooling System: Air cooled Air cooled Liquid cooled Air cooled
Compression Ratio: 9.3:1 9.4:1 11.0:1 10.0:1
Induction: 2x 32mm Keihin carb. 2x 32mm Keihin carburetors 4x 33mm Keihin carbs.
Ignition: Capacitor discharge electronic ignition Transistorized Electronic
Max Power: 17 hp @ 7500 rpm 35 hp / 25.5 kW @ 11000 rpm 120 hp / 87.5 kW @ 9000 rpm
Max Torque: 21.5 Nm / 15.9 lb-ft @ 10000 rpm 98 Nm / 72.5 ft-lb @ 7500 rpm
Transmission: 5 Speed 4 Speed 6 Speed 5 Speed
Final Drive: Chain Chain Chain 520 O-ring Chain
Front Suspension: Telehydraulic forks 31mm Forks, centre axle fork Air assisted telescopic forks with anti-dive adjustment Adjustable telescopic hydraulic fork
Rear Suspension: Swingarm fork with adjustable telehydraulic shocks Dual shocks adjustable spring preload Pro-link air assisted monoshock Swinging arm fork with adjustable Telehydraulic shocks absorbers
Front Brakes: Single disc Single disc Single disk, 2-piston calliper 2x 296mm discs 2 piston calipers
Rear Brakes: Drum Drum Drum Single 296mm disc 2 piston caliper
Front Tyre: 3.50-18 3.25-18 100/90-16 54S 3.50-19
Rear Tyre: 4.60-16 110/90-16 120/80-17 61S 130/90-18
Fuel Capacity: 9.5 Litres / 2.5 US gal 12.5 Litres 14 Litres / 3.7 US gal 26 Litres / 6.9 gal