Moto-Data

Harley-Davidson Harley Davidson FLHRC/I Road King Classic (2001-02) vs Harley-Davidson Harley Davidson Road King (2019-20)

Comparison technical specifications


Add bike
2001 Harley-Davidson Harley Davidson FLHRC/I Road King Classic
Remove bike
2019 Harley-Davidson Harley Davidson Road King
Remove bike
Make: Harley-Davidson Harley-Davidson
Model: Harley Davidson FLHRC/I Road King Classic Harley Davidson Road King
Years: 2001-02 2019-20
Engine: Four stroke, 45° V-Twin, Twin Cam 88® vibration isolation-mounted Valves Pushrod-operated overhead valves; w/ hydraulic self-adjusting lifters; two valves per cylinder Four stroke, V-Twin, Milwaukee-Eight 107, Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters, 4 valves per cylinder
Capacity: 1449 cc / 88.4 cu-in 1746 cc / 107 cub in.
Bore x Stroke: 95.3 x 101.6 mm 100 x 111 mm / 3.937 x 4.374 in
Cooling System: Air cooled Air cooled
Compression Ratio: 8.9:1 10.0:1
Lubrication: Dry sump, internally mounted, crank driven gerotor pressure and dual scavenge pump with spin on 10ì pressurized oil filter Pressurized, dry-sump with oil cooler
Induction: Carburetion 40 mm constant velocity with enrichener and accelerator pump ESPFI 38 mm throttle bore electronic sequential port fuel injection Electronic Sequential Port Fuel Injection (ESPFI)
Ignition: Single-fire, non-wasted, map-controlled spark ignition Single-fire, non-wasted, map-controlled spark ignition
Starting: Electric Electric
Max Torque: 116.6 Nm / 86 lb-ft @ 3500rpm 151 Nm / 111.4 ft/lb @ 3250 rpm
Transmission: 5 Speed 6 Speed
Final Drive: Belt Belt
Gear Ratio: 1st 10.110 2nd 6.958 3rd 4.953 4th 3.862 5th 3.150 1st 9.593 2nd 6.65 3rd 4.938 4th 4 5th 3.407 6th 2.875
Frame: Mild steel, rectangular section backbone w/ twin down-tubes Swing Arm Conventional, rectangular Mild steel; tubular frame; two-piece stamped and welded backbone; cast and forged junctions; twin downtubes; bolt-on rear frame with forged fender supports; MIG welded Swingarm Mild steel; two-piece drawn and welded section; forged junctions; MIG welded
Front Suspension: Telescopic 49 mm forks, Dual Bending Valve
Rear Suspension: Air-adjustable Premium low height hand-adjustable rear shocks
Front Brakes: 2x 292mm discs 4 piston calipers 2 x 300 mm disc, caliper type 32 mm, 4-piston fixed, dual floating rotors
Rear Brakes: Single 292mm disc 4 piston caliper Single 300 mm, caliper type 32 mm, 4-piston, fixed rotor
Front Tyre: 130/90-16 BW 130/80B17 65H
Rear Tyre: 130/90-16 BW 180/65B16 81H
Rake: 26.0° 26°
Trail: 156.6.3 mm / 6.2 in 170 mm / 6.7 in
Wheelbase: 1612 mm / 63.5 in 1625 mm / 64 in
Seat Height: 684 mm / 26.9 in Laden 7 668 mm / 26.3 in. Unladen 706 mm / 27.8 in.
Ground Clearance: 130 mm / 5.1 in 135 mm / 5.3 in
Dry Weight: 322 kg / 710.0 lbs 362 kg / 798 lbs
Fuel Capacity: 18.9 Litres / 5.0 US gal 22.7 Litres / 6.0 US gal