Yamaha FZR 1000 EXUP (1989) vs Harley-Davidson Harley Davidson FXDB Dyna Glide Daytona (1992)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | Yamaha | Harley-Davidson |
| Model: | FZR 1000 EXUP | Harley Davidson FXDB Dyna Glide Daytona |
| Years: | 1989 | 1992 |
| Engine: | Four stroke, 35° forward inclined transverse four cylinder, DOHC, 5 valves per cylinder | Four stroke, 45° V-Twin, OHV, 2 valves per cylinder. |
| Capacity: | 1002 cc / 61.2 cu/in | 1337 cc / 81.5 cu-in |
| Bore x Stroke: | 75.5 x 56 mm | 88.8 x 108 mm |
| Cooling System: | Liquid cooled | Air cooled |
| Compression Ratio: | 12.0:1 | 8.5:1 |
| Lubrication: | Wet sump | Dry sump |
| Induction: | 4x 38mm Mikuni BDST carburetors | 38mm Keihin carburetor |
| Ignition: | TCI digital ignition | Analogue CDI |
| Starting: | Electric | Electric |
| Max Power: | 145 hp / 105.7 kW @ 10000 rpm | 67 hp / 48.9 kW @ 6000 rpm |
| Max Torque: | 10.9 kgf-m / 107 Nm @ 8500 rpm | 97 Nm / 71.5 lb-ft @ 2350 rpm |
| Clutch: | Wet, multi-disc | Wet 9-plate |
| Transmission: | 5 Speed | 5 Speed |
| Final Drive: | Chain 532ZLV, 110 Links | Belt |
| Frame: | Diamond Deltabox | Mild steel, tubular frame; rectangular section backbone; stamped, cast and forged junctions, forged fender supports; MIG welded |
| Front Suspension: | 43mm Telehydraulic for adjustable preload | 49 mm with polished aluminum fork triple clamp and dual-rate springs |
| Rear Suspension: | Gas/oil single shock, rising rate adjustable preload and damping | Coil over shock |
| Front Brakes: | 2x 320mm discs 4 piston calipers | 2x 292mm discs |
| Rear Brakes: | Single 267mm disc 1 piston caliper | Single 292mm disc |
| Front Tyre: | 130/60 VR17 | 100/90-19 |
| Rear Tyre: | 170/60 VR17 | 130/90-16 |
| Dry Weight: | 209l kg / 460 lbs | 271.0 kg / 597.5 lbs |
| Fuel Capacity: | 19 Litres / 4.2 gal | 16 Litres / 4.2 US gal |