Ducati 48 Rolly (1968) vs Ducati Monster 796 (2013)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
| Make: | Ducati | Ducati |
| Model: | 48 Rolly | Monster 796 |
| Years: | 1968 | 2013 |
| Engine: | Two stroke, single cylinder, piston-port | Four stroke, 90° “L” twin cylinder, SOHC, desmodromic 2 valves per cylinder |
| Capacity: | 47.6 cc / 2.9 cu in | 803 cc / 49.0 cu in |
| Bore x Stroke: | 38 x 42 mm | 88 x 66 mm |
| Cooling System: | Air cooled | Air cooled |
| Induction: | Dell'Orto UA18S | Siemens electronic fuel injection, 45mm throttle body |
| Ignition: | 6V 18W Flywheel magneto | Marelli electronic |
| Starting: | Kick | Electric |
| Max Power: | 3.3 kW / 4.5 hp @ 5200 rpm | 64 kW / 87 hp @ 8250 rpm |
| Clutch: | Wet, multiplate | APTC wet multiplate with hydraulic control |
| Transmission: | Single speed | 6 Speed |
| Final Drive: | Chain | Chain; front sprocket 15; rear sprocket 39 |
| Frame: | Pressed steel | Tubular steel trellis |
| Front Suspension: | Telescopic fork | Showa 43mm upside-down forks |
| Rear Suspension: | Rigid, spring loaded saddle | Progressive linkage with fully adjustable Sachs monoshock with piggy back aluminum swing arm |
| Front Brakes: | Drum, 90 mm | 2 x 320mm Discs, 4 piston calipers |
| Rear Brakes: | Drum, 90 mm | Single 245 mm disc, 2 piston caliper |
| Dry Weight: | 42 kg / 93 lbs | 167 kg - 369 lbs / 169 kg -373 lbs ABS version |
| Top Speed: | 50 km/h / 31 mph | 200.4 km/h / 124.5 mph |