Italjet Dragster 459 (2026) vs Ducati Scrambler Nightshift (2026) vs Harley-Davidson Harley Davidson Low Rider S FXLRS (2025)
Comparison technical specifications
Add bike |
Remove bike |
Remove bike |
Remove bike |
| Make: | Italjet | Ducati | Harley-Davidson |
| Model: | Dragster 459 | Scrambler Nightshift | Harley Davidson Low Rider S FXLRS |
| Years: | 2026 | 2026 | 2025 |
| Engine: | Four stroke, parallel twin, DOHC, 4 valve per cylinder | Four stroke, 90? ?L? twin cylinder, SOHC, Desmodromic 2 valves per cylinder | Four stroke, V-Twin, 2 Milwaukee-Eight 117 custom, Pushrod-operated, overhead valves with hydraulic, self-adjusting lifters, 4 valves per cylinder |
| Capacity: | 449 cc / 27.4 cu-in | 803 cc / 49.0 cub in | 1923 cc / 117 cu in |
| Bore x Stroke: | 70 x 58.4 mm | 88 x 66 mm | 103.5 x 114.3 in |
| Compression Ratio: | 11.5:1 | 11.0:1 | 10.3:1 |
| Cooling System: | Liquid cooled | Air cooled | Air cooled |
| Exhaust: | Akrapovič | Stainless steel muffler with catalytic converter and 2 lambda probes, aluminum tail pipes | 2-into-1d, catalyst in header |
| Induction: | Electronic fuel injection | Electronic fuel injection, 50 mm throttle body, Ride-by-Wire system | Electronic Sequential Port Fuel Injection (ESPFI) |
| Ignition: | CDI | Marelli electronic | Single-fire, non-wasted, map-controlled spark ignition |
| Starting: | Electric | Electric | Electric |
| Max Power: | 47 hp / 35 kW @ 9500 rpm | 73 hp / 53.6 kW @ 8250 rpm | 85 kW / 114Hp @ 5000 rpm |
| Max Torque: | 40.7 Nm / 30 lb-ft @ 8000 rpm | 65.2 Nm / 48.1 lb-ft @ 7000 rpm | 174 Nm / 128 lb-ft @ 4000 rpm |
| Clutch: | Automatic and manually actuated wet multiplate | Hydraulically controlled slipper and self-servo wet multiplate clutch | Mechanical, 10 plate wet, assist & conventional |
| Transmission: | 6-Speed with automatic and paddle shifting | 6 Speed | 6 Speed |
| Final Drive: | Chain | Chain, front spocket 15, rear sprocket 46 | Belt, 32/66 ratio |
| Frame: | Steel trellis | Tubular steel trellis frame | Mild steel, tubular frame, rectangular section backbone, stamped, cast, and forged junctions, MIG welded, aluminum forged fender supports |
| Front Suspension: | Marzocchi inverted fork | 41mm Kayaba USD forks | Single cartridge 43 mm inverted with aluminum fork triple clamps; triple rate spring |
| Rear Suspension: | Spring-preload adjustable Marzocchi piggyback-reservoir shock with Italjet Stiffness Adjustment System (ISAS) | Kayaba rear shock, pre-load adjustable | Hidden, free piston, coil-over monoshock, 56mm stroke, hydraulic preload adjustment |
| Front Brakes: | 2 x 270 mm floating discs with radially mounted Brembo calipers | Single 330 mm disc, 4-piston caliper | 2 x 300mm discs, 4 piston fixed caliper |
| Rear Brakes: | Single 230mm hydraulic disc, Brembo caliper | Single 245 mm disc, 1-piston caliper | Single 292mm disc, 2 piston floating caliper |
| ABS: | Standard | Bosch Cornering ABS as standard equipment | Standard |
| Front Tyre: | 120/70-15 Pirelli Diablo Rosso Scooter | 110/80 R18 Pirelli MT 60 RS | 110/90R19,62H,BW |
| Rear Tyre: | 160/60-15 Pirelli Diablo Rosso Scooter | 180/55 R17 Pirelli MT 60 RS | 180/70R16,77H,BW |
| Wheelbase: | 1539 mm / 60.6 in | 1447 mm / 57 in | 1615 mm / 63.6 in |
| Seat Height: | 815 mm / 32.1 in | 795 mm / 31.3 inches 810 mm / 31.9 inches, with high seat accessory 780 mm / 30.7 inches, with low seat accessory | Unladen 715 mm / 28.1 in Laden 686 mm / 27 in |
| Fuel Capacity: | 15.9 Litres / 4.2 US gal | 14.5 Litres / 3.8 US gal | 18.9 Litres / US 5.0 gal |